Yamaha TTR 125 2020, Owner'S Manual

Page: 26 / 86

Instrument an d control functions
4-9
4
3. Tighten the locknut to the speci-
fied torque.
NOTICE:
Always
ti g hten the locknut a g ainst the
a d justin g nut, an d then ti g hten
the locknut to the specifie d
torque.
[ECA11242]
Re b oun d d ampin g force
Turn the adjusting dial in direction (a) to
increase the rebound damping force.
Turn the adjusting dial in direction (b) to
decrease the rebound damping force.
To set the rebound damping force, turn
the adjuster in direction (a) until it
stops, and then count the clicks in di-
rection (b).
TIP

When turning the damping force
adjuster in direction (a), the 0 click
position and the 1 click position
may be the same.

When turning the damping force
adjuster in direction (b), it may
click beyond the stated specifica-
tions, however such adjustments
are ineffective and may damage
the suspension.
Compression d ampin g force
Turn the adjusting knob in direction (a)
to increase the compression damping
force.
Turn the adjusting knob in direction (b)
to decrease the compression damping
force.
To set the compression damping
force, turn the adjuster in direction (a)
until it stops, and then count the clicks
in direction (b).
Ti g htenin g torque:
Locknut:
42 N·m (4.2 kgf·m, 31 lb·ft)
1. Rebound damping force adjusting dial
Re b oun d d ampin g settin g :
Minimum (soft):
20 click(s) in direction (b)
Standard:
12 click(s) in direction (b)
Maximum (hard):
0 click(s) in direction (b)
1. Compression damping force adjusting knob
U2PT17E0.book Page 9 Monday, March 30, 2020 2:13 PM