PERIODIC MAINTENANCE AND ADJUSTMENT
7-28
2
3
4
5
6
7
8
9
EAU23814
Replacing the headlight bulb
This model is equipped with a quartz
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
ECA10660
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with al-
cohol or thinner.
1. Remove cowling A. (See page 7-6.)
2. Remove the headlight unit by re-
moving the bolts.
3. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
4. Remove the headlight bulb holder
by turning it counterclockwise, and
then remove the burnt-out bulb.
5. Place a new bulb into position, and
then secure it with the bulb holder.
6. Install the bulb cover, and then
connect the coupler.
7. Place the headlight unit in the orig-
inal position, and then install the
bolts.
8. Install the cowling.
9. Have a Yamaha dealer adjust the
headlight beam if necessary.
1. Do not touch the glass part of the bulb.
1
1. Bolt
1
1. Headlight bulb holder
1
✧✷✿✬✥✳ ✥✫
