Yamaha TT-R90 Owner'S Manual Download

Page: 35 / 82

OPERATION AND IMPORTANT RIDING POINTS

5-2

EAU40090

Starting and warming up a
cold engine [TT-R90E(W)]

1. Turn the fuel cock lever to “ON”.
2. Turn the key to “ON” and make

sure that the engine stop switch is
set to “

”.

3. Shift the transmission into the neu-

tral position.

WARNING

EWA14410

●

Be sure to shift the transmis-
sion into neutral before starting
the engine.

●

Never ride with the sidestand
down.

4. Turn the starter (choke) on and

completely close the throttle. (See
page 3-6.)

5. Start the engine by pushing the

start switch.

6. After starting the engine, move the

starter (choke) back halfway.

CAUTION:

ECA11130

For maximum engine life, always
warm the engine up before starting
off. Never accelerate hard when the
engine is cold!

7. When the engine is warm, turn the

starter (choke) off.

NOTE:

The engine is warm when it responds
normally to the throttle with the starter
(choke) turned off.

EAU16640

Starting a warm engine

Follow the same procedure as for start-
ing a cold engine with the exception
that the starter (choke) is not required
when the engine is warm.

U3P281E0.book Page 2 Monday, April 17, 2006 11:26 AM

Summary of Contents for TT-R90



















































































Search results

Summary of Contents for TT-R90

Reviews:

Related manuals for TT-R90

Brands by name

Popular brands

Yamaha TT-R90, Owner'S Manual

Search results

Summary of Contents for TT-R90

Reviews:

Related manuals for TT-R90

Brands by name

Popular brands