Yamaha TT-R90(R), Owner'S Service Manual

Page: 210 / 288

4 - 32
ENG
CLUTCH
ASSEMBLY AND INSTALLATION
Primary clutch
1. Install:
●
Washer 1
●
Nut (primary clutch) 2
NOTE:
Tighten the nut while holding the magneto
rotor with the sheave holder
3 .
Clutch
1. Install:
●
Lock washer 1
●
Nut (clutch boss) 2
NOTE:
Use the clutch holding tool 3 to hold the clutch
boss.
Å
For USA and CDN
ı
Except for USA and CDN
2. Bend:
●
Lock washer tab
Sheave holder:
YS-1880-A/90890-01701
Clutch holding tool:
YM-91042/90890-04086
T
R
.
.
50 Nm (5.0 m · kg, 36 ft · lb)
New
T
R
.
.
70 Nm (7.0 m · kg, 50 ft · lb)
Å ı
Clutch release adjustment
1. Adjust:
●
Clutch release
Adjustment steps:
●
Loosen the locknut 1 .
●
Turn in the adjuster 2 until it is lightly
seated.
●
Turn out by 1/8 turn.
●
Tighten the locknut.
T
R
.
.
Locknut:
8 Nm (0.8 m • kg, 5.8 ft • lb)