Yamaha TT-R50 Owner'S Manual Download Page 68 | Manualshive

Page: 68 / 86

background image

PERIODIC MAINTENANCE AND ADJUSTMENT

7-25

7

4. Disconnect the battery coupler.

5. Remove the blown fuse, and then

install a new fuse of the specified
amperage.

WARNING! Do not

use a fuse of a higher amperage

rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.

[EWA15131]

6. Connect the battery coupler.
7. Install the battery cover by install-

ing the bolts.

8. Install the seat.
9. Turn the key to “ON”.

10. If the fuse immediately blows

again, have a Yamaha dealer
check the electrical system.

EAU24350

Supporting the motorcycle

Since this model is not equipped with a
centerstand, follow these precautions
when removing the front and rear
wheel or performing other maintenance
requiring the motorcycle to stand up-
right. Check that the motorcycle is in a
stable and level position before starting
any maintenance. A strong wooden
box can be placed under the engine for
added stability.

To service the front wheel

1. Stabilize the rear of the motorcycle

by using a motorcycle stand or, if
an additional motorcycle stand is
not available, by placing a jack un-
der the frame in front of the rear
wheel.

2. Raise the front wheel off the

ground by using a motorcycle
stand.

To service the rear wheel

Raise the rear wheel off the ground by
using a motorcycle stand or, if a motor-
cycle stand is not available, by placing

1. Bolt
2. Battery

3. Battery cover

1. Battery coupler

1

Specified fuse:

10.0 A

U2CJ80E0.book Page 25 Tuesday, June 12, 2012 11:15 AM

«
...
66
67
68
69
70
...
»

Summary of Contents for TT-R50























































































Reviews:

No comments

Related manuals for TT-R50

Brand: 3M Pages: 26

Brand: BMW Pages: 245

Brand: R&G Pages: 15

Brand: N-Com Pages: 2

Brand: hepco & becker Pages: 4

Brand: BMW Pages: 176

Brand: Victory Motorcycles Pages: 332

Scout 25L Pannier Kit V2.0

Brand: MOSKO MOTO Pages: 13

B-TRK502-01-01-SL

Brand: SRC Pages: 5

Brand: Yamaha Pages: 390

Brand: Yamaha Pages: 468

Brand: Yamaha Pages: 364

Dirt rocket XM500

Brand: X-TREME scooter Pages: 14

FreeGo LTK125 2019

Brand: Yamaha Pages: 84

Brand: Yamaha Pages: 106

Brand: Yamaha Pages: 114

Brand: Yamaha Pages: 112

Brand: Yamaha Pages: 132

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands