manualshive.com logo in svg

Yamaha TT-R230V 2005, Owner'S Manual, Page: 55 / 72

Share
Download
Yamaha TT-R230V 2005 Owner'S Manual Download Page 55

6 - 2 2

6

PERIODIC MAINTENANCE AND MINOR REPAIR

Checking and lubricating the
brake and clutch levers

The operation of the brake and clutch
levers should be checked before each
ride, and the lever pivots should be
lubricated if necessary.

Recommended lubricant:

Lithium-soap-based grease (all-
purpose grease)

Lubricating the brake pedal

The operation of the brake pedal should
be checked before each ride, and the
pedal pivot should be lubricated if
necessary.

Recommended lubricant:

Lithium-soap-based grease (all-
purpose grease)

Checking and lubricating the
sidestand

The operation of the sidestand should
be checked before each ride, and the
sidestand pivot and metal-to-metal
contact surfaces should be lubricated if
necessary.

If the sidestand does not move up and
down smoothly, have a Yamaha dealer
check or repair it.

Recommended lubricant:

Lithium-soap-based grease (all-
purpose grease)

ProCarManuals.com

Summary of Contents for TT-R230V 2005









































































Reviews:

No comments