manualshive.com logo in svg

Yamaha TT-R230V 2005, Owner'S Manual, Page: 3 / 72

Share
Download
Yamaha TT-R230V 2005 Owner'S Manual Download Page 3

1

IMPORTANT MANUAL INFORMATION

Particularly important information is distinguished in this manual by the following notations:

The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

Failure to follow WARNING instructions could result in severe injury or death to the motorcycle
operator, a bystander or a person inspecting or repairing the motorcycle.

A CAUTION indicates special precautions that must be taken to avoid damage to the motorcycle.

A NOTE provides key information to make procedures easier or clearer.

●

This manual should be considered a permanent part of this motorcycle and should remain with it even if the motorcycle
is subsequently sold.

●

Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most
current product information available at the time of printing, there may be minor discrepancies between your motorcycle
and this manual. If you have any questions concerning this manual, please consult your Yamaha dealer.

ProCarManuals.com

Summary of Contents for TT-R230V 2005









































































Reviews:

No comments