background image

Consumer information

10-5

10

EAU61834

YAMAHA MOTOR CORPORATION, U.S.A. 2020 AND LATER MODEL OFF-ROAD MOTORCYCLE 
LIMITED WARRANTY

Yamaha Motor Corporation, U.S.A. hereby warrants that 
new Yamaha off-road motorcycles purchased from an 
authorized Yamaha motorcycle dealer in the continental 
United States will be free from defects in material and 
workmanship for the period of time stated herein, subject 
to certain stated limitations. Covered off-road 
motorcycles are those units certified by Yamaha to EPA 
noise regulations and come equipped from the factory 
with USDA-FS approved spark arresters.

THE PERIOD OF WARRANTY

 for Yamaha off-road 

motorcycles shall be ninety (90) days from the date of 
purchase, with no mileage limitation, except for the 
battery, which is warranted for thirty (30) days from the 
date of purchase.

DURING THE PERIOD OF WARRANTY

 any authorized 

Yamaha motorcycle dealer will, free of charge, repair or 
replace, at Yamaha’s option, any part adjudged defective 
by Yamaha due to faulty workmanship or material from 
the factory. Parts used in warranty repairs will be 
war-ranted for the balance of the product’s warranty 
period. All parts replaced under warranty become 
property of Yamaha Motor Corporation, U.S.A.

GENERAL EXCLUSIONS

 from this warranty shall 

include any failures caused by:

Competition or racing use.

a.

Installation of parts or accessories that are not 
qualitatively equivalent to genuine Yamaha parts.

b.

Abnormal strain, neglect, or abuse.

c.

Lack of proper maintenance and off-season storage 
as described in the Owner’s Manual.

d.

Accident or collision damage.

e.

Modification to original parts.

f.

Damage due to improper transportation.

g.

SPECIFIC EXCLUSIONS

 from this warranty shall 

include parts replaced due to normal wear or routine 
maintenance.

THE CUSTOMER’S RESPONSIBILITY

 under this 

warranty shall be to: 

Operate and maintain the motorcycle as specified in 
the appropriate Owner’s Manual, and

1.

Give notice to an authorized Yamaha motorcycle 
dealer of any and all apparent defects within ten (10) 
days after discovery, and make the motorcycle 
available at that time for inspection and repairs at 
such dealer’s place of business.

2.

EMISSION CONTROL SYSTEM WARRANTY

Yamaha Motor Corporation, U.S.A. also warrants to the 
ultimate purchaser and each subsequent purchaser of 
each applicable model Yamaha motorcycle covered by 
this warranty that the vehicle is designed, built, and 
equipped so as to conform at the time of sale with all 
U.S. emissions standards applicable at the time of 
manufacture and that it is free from defects in materials 
and workmanship which would cause it not to meet these 
standards within the period listed immediately below. 
Failures other than those resulting from defects in 
material or workmanship which arise solely as a result of 
owner abuse and/or lack of proper maintenance are not 
covered by this warranty.

All TT-R  Models

Thirty (30) months from the original purchase date

WARRANTY TRANSFER:

 To transfer the warranty from 

the original purchaser to any subsequent purchaser(s), it 
is imperative that the motorcycle be inspected and 
registered for warranty by an authorized Yamaha

motorcycle dealer. In order for this warranty to remain in 
effect, this inspection and registration must take place 
within ten (10) days after transfer of ownership to the 
subsequent purchaser. A reasonable dealer-imposed fee 
may be charged for this inspection.

YAMAHA MOTOR CORPORATION, U.S.A. MAKES NO 
OTHER WARRANTY OF ANY KIND, EXPRESSED OR 
IMPLIED. ALL IMPLIED 

WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE WHICH EXCEED 

THE 

OBLIGATIONS AND TIME LIMITS STATED IN THIS 
WARRANTY ARE HEREBY DISCLAIMED BY YAMAHA 
MOTOR CORPORATION, U.S.A. AND EXCLUDED 
FROM THIS WARRANTY.

SOME STATES DO NOT ALLOW LIMITATIONS ON 
HOW LONG AN IMPLIED WARRANTY LASTS, SO THE 
ABOVE LIMITATION MAY NOT APPLY TO YOU. ALSO 
EXCLUDED FROM THIS WARRANTY ARE ANY 
INCIDENTAL OR CONSEQUENTIAL DAMAGES 
INCLUDING LOSS OF USE. SOME STATES DO NOT 
ALLOW THE EXCLUSION OR LIMITATION OF 
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO 
THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL 
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS 
WHICH VARY FROM STATE TO STATE.

YAMAHA MOTOR CORPORATION, U.S.A.

Post Office Box 6555

Cypress, California 90630

1-800-962-7926

U2PT17E0.book  Page 5  Monday, March 30, 2020  2:13 PM

Summary of Contents for TT-R125LWE























































































Reviews: