3 - 18
INSP
ADJ
BRAKE PEDAL HEIGHT ADJUSTMENT
1. Check:
●
Brake pedal height
a
Out of specification
→
Adjust.
2. Adjust:
●
Brake pedal height
FRONT BRAKE PAD INSPECTION AND
REPLACEMENT (TT-R125LW)
1. Remove:
●
Plug
2. Inspect:
●
Brake pad thickness
a
Out of specification
→
Replace as a set.
Brake pedal height
a
:
1 mm (0.04 in)
Pedal height adjustment steps:
●
Loosen the locknut
1
.
●
Turn the adjusting bolt
2
until the pedal
height
a
is within specified height.
●
Tighten the locknut.
Brake pad thickness
a
:
Standard
<Limit>
4.0 mm
(0.16 in)
0.8 mm
(0.03 in)
3. Replace:
●
Brake pad
Brake pad replacement steps:
●
Remove the brake caliper support bolt
1
.
●
Turn the brake caliper
2
counterclock-
wise
a
.
●
Replace the brake pads
3
.
BRAKE PEDAL HEIGHT ADJUSTMENT/FRONT BRAKE
PAD INSPECTION AND REPLACEMENT (TT-R125LW)
