Yamaha TT-R110E(Y) Owner'S Manual Download Page 3 | Manualshive

Page: 3 / 80

background image

INTRODUCTION

EAU41733

Congratulations on your purchase of the Yamaha TT-R110EY. This model is the result of Yamaha’s vast experience in the
production of fine sporting, touring, and pacesetting racing machines. It represents the high degree of craftsmanship and
reliability that have made Yamaha a leader in these fields.
This manual will give you an understanding of the operation, inspection, and basic maintenance of this motorcycle. If you
have any questions concerning the operation or maintenance of your motorcycle, please consult a Yamaha dealer.
The design and manufacture of this Yamaha motorcycle fully comply with the emissions standards for clean air applicable at
the date of manufacture. Yamaha has met these standards without reducing the performance or economy of operation of the
motorcycle. To maintain these high standards, it is important that you and your Yamaha dealer pay close attention to the
recommended maintenance schedules and operating instructions contained within this manual.
Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most cur-
rent product information available at the time of printing, there may be minor discrepancies between your motorcycle and this
manual. If there is any question concerning this manual, please consult a Yamaha dealer.

WARNING

EWA14461

Please read this manual, the “TIPS AND PRACTICE GUIDE FOR THE OFF HIGHWAY MOTORCYCLIST” and the
“PARENTS, YOUNGSTERS AND OFF-HIGHWAY MOTORCYCLES” booklets carefully and completely before oper-
ating or allowing your child to operate this motorcycle. Do not attempt to operate this motorcycle until you have
attained adequate knowledge of its controls and operating features and until you have been trained in safe and
proper riding techniques. Regular inspections and careful maintenance, along with good riding skills, will ensure
that you safely enjoy the capabilities and the reliability of this motorcycle.

WARNING

EWA14351

This motorcycle is designed and manufactured for off-road use only. It is illegal to operate this motorcycle on any
public street, road or highway. Such use is prohibited by law. This motorcycle complies with almost all state off-
highway noise level and spark arrester laws and regulations. Please check your local riding laws and regulations
before operating this motorcycle.

U5B611E0.book Page 1 Thursday, June 12, 2008 5:30 PM

«
1
2
3
4
5
...
»

Summary of Contents for TT-R110E(Y)

















































































Reviews:

No comments

Related manuals for TT-R110E(Y)

Brand: kellermann Pages: 2

Brand: Honda Pages: 25

D14/4 BANTAM SUPREME D14/4 BANTAM SPORTS

Brand: BSA Pages: 120

MILWAUKEE-EIGHT 5833

Brand: JIMS Pages: 10

Brand: Megelli Pages: 83

Brand: Dayi Motor Pages: 18

Brand: Yamaha Pages: 82

Brand: Yamaha Pages: 84

Brand: Yamaha Pages: 90

Brand: Yamaha Pages: 83

Brand: Yamaha Pages: 148

Brand: Yamaha Pages: 96

Brand: Yamaha Pages: 108

Brand: Yamaha Pages: 190

Brand: Yamaha Pages: 196

Brand: Yamaha Pages: 198

Brand: Yamaha Pages: 124

Brand: Yamaha Pages: 234

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands