background image

19 

En

USING THE ALARM FUNCTION (IntelliAlarm)

‹

Setting the alarm time and alarm type

The alarm will not function when the unit is in ECO standby. To use the alarm function, set the rear panel 

CLOCK

 switch to the ON position 

(

 P. 3).

Setting the alarm

1

Press 

SET

.

The alarm indicator (

) will blink.

2

Set the alarm.

Set items 

1

-

5

 described below.

Press 

/

+

 to select a numerical value, and press 

ENTER

 to confirm it.

3

Complete the settings.

When you set the VOLUME for item 

5

, the display will indicate 

“Completed!” and your settings will be confirmed.
The alarm will be turned on and the alarm indicator (

) will light.

• By pressing 

SET

 during this procedure, you can confirm the alarm settings with the 

currently-specified values and complete the procedure.

• If you decide to cancel alarm settings mid-way through the procedure, press

.

1

2

*1

If you choose RESUME when specifying the track/folder/preset number, the last-
played track/folder/station will be played (resume playback)

Items

Setting or range

1

ALARM SELECT

* This can be selected after you’ve used “DTA 

CONTROLLER” to set the alarm (

 P. 21). If you’re not 

using “DTA CONTROLLER,” proceed to item 

2

.

ONE DAY:

 An alarm that sounds only once at the 

specified time.

WEEKLY:

 An alarm whose time can be specified for 

each day of the week (settable only using 
“DTA CONTROLLER”).

If you’ve chosen WEEKLY, this completes the alarm 
setting.

2

ALARM TIME

Make settings in the order of hours   minutes.

3

ALARM TYPE

Select from BEEP, SOURCE or BEEP. For 
details, refer to “3 types of alarms” (

 P. 18).

If you selected BEEP, proceed to item 

5

.

4

ALARM SOURCE

(If you selected 
BEEP or 
SOURCE as the 
alarm type)

CD:

Play back music from a CD.
Specify the track number (data CD: folder 
number) (RESUME

*1

, 1-99).

USB:

Play back music from a USB device.
Specify the folder number (RESUME, 1-999).

DAB/FM:

Play a DAB/FM station.
Specify the preset number (RESUME, 
1-30).

If the selected source cannot be played back at the time set 
for the alarm, the beep sound is played back.

5

ALARM VOLUME

Specifies the volume (5-60) of the alarm.

   9 : 1 2
 

C o m p l e t e d !

3

Alarm time

Alarm indicator

TSX-B235_AB_En.book  Page 19  Wednesday, May 13, 2015  5:27 PM

Summary of Contents for TSX-B235D

































Reviews: