background image

TROUBLESHOOTING

24 

En

FM reception

Problem

Cause

Solution

Too much noise.

The antenna may be connected improperly.

Make sure the antenna is connected properly (

 P. 3) o

use a commercially available outdoor antenna.

The antenna is too close to the unit or to an 
electronic device.

Position the antenna as far away as possible from the unit 
or the electronic device.

Too much noise during stereo 
broadcast.

The radio station you selected may be far from 
your area, or the radio wave reception is weak in 
your area.

Try manual tuning to improve the signal quality (

 P. 14

or use a commercially available outdoor antenna.

Even with an outdoor antenna, 
radio wave reception is weak. 
(Sound is distorted.)

Multipath reflection or other radio interferences 
may have occurred.

Change the height, direction, or placement of the antenna.

Remote control

Problem

Cause

Solution

The remote control does not work 
properly.

The remote control may be operated outside its 
operation range.

For information on the remote control operation range, 
refer to “How to use the remote control” (P. 1).

The remote control signal receiver on the unit 

 

(

 P. 3) may be exposed to direct sunlight or 

lighting (inverted fluorescent lamps).

Change the lighting or orientation of the unit.

The battery may be worn out.

Replace the battery with new one (

 P. 1).

There are obstacles between the remote control 
signal receiver on the unit (

 P. 3) and the 

remote control.

Remove the obstacles.

Summary of Contents for TSX-B232
































Reviews: