background image

En

1 To assure the finest performance, please read this manual 

carefully. Keep it in a safe place for future reference.

2 Install this unit in a well ventilated, cool, dry, clean place - 

away from direct sunlight, heat sources, vibration, dust, 
moisture and cold. For proper ventilation, allow the 
following minimum clearances.

 

Top: 15 cm (6 in)

 

Rear: 10 cm (4 in)

 

Sides: 10 cm (4 in)

3 Locate this unit away from other electrical appliances, 

motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes 

from cold to hot, and do not locate this unit in an 
environment with high humidity (i.e. a room with a 
humidifier) to prevent condensation inside this unit, which 
may cause an electrical shock, fire, damage to this unit, 
and/or personal injury.

5 Avoid installing this unit where foreign object may fall 

onto this unit and/or this unit may be exposed to liquid 
dripping or splashing. On the top of this unit, do not place:

– Other components, as they may cause damage and/or 

discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause fire, 

damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall and liquid 

may cause electrical shock to the user and/or damage to 
this unit.

6 Do not cover this unit with a newspaper, tablecloth, 

curtain, etc. in order not to obstruct heat radiation. If the 
temperature inside this unit rises, it may cause fire, 
damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all 

connections are complete.

8 Do not operate this unit upside-down. It may overheat, 

possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet, 

grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might 

damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using 

this unit with a higher voltage than specified is dangerous 
and may cause fire, damage to this unit, and/or personal 
injury. Yamaha will not be held responsible for any 
damage resulting from use of this unit with a voltage other 
than specified.

13 To prevent damage by lightning, keep the power cable 

disconnected from a wall outlet or this unit during a 
lightning storm. 

14 Do not attempt to modify or fix this unit. Contact qualified 

Yamaha service personnel when any service is needed. 
The cabinet should never be opened for any reasons.

15 When not planning to use this unit for long periods of time 

(i.e. vacation), disconnect the AC power plug from the 
wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section on 

common operating errors before concluding that this unit 
is faulty.

17 Before moving this unit, press 

 to set the system to off, 

and disconnect the AC power plug from the wall outlet.

18 Condensation will form when the surrounding 

temperature changes suddenly. Disconnect the power 
cable from the outlet, then leave this unit alone.

19 When using this unit for a long time, this unit may become 

warm. Turn the system off, then leave this unit alone for 
cooling.

20 Install this unit near the wall outlet and where the AC 

power plug can be reached easily.

21 The batteries shall not be exposed to excessive heat such 

as sunshine, fire or the like. When you dispose of 
batteries, follow your regional regulations.

– Keep the batteries in a location out of reach of children. 

Batteries can be dangerous if a child were to put in his or 
her mouth.

– If the batteries grow old, the effective operation range of 

the remote control decreases considerably. If this happens, 
replace the batteries with new one as soon as possible.

– Do not use old batteries together with new ones.

– Do not use different types of batteries (such as alkaline 

and manganese batteries) together. Read the packaging 
carefully as these different types of batteries may have the 
same shape and color.

– Exhausted batteries may leak. If the batteries have leaked, 

dispose of them immediately. Avoid touching the leaked 
material or letting it come into contact with clothing, etc. 
Clean the battery compartment thoroughly before 
installing new batteries.

– If you plan not to use the unit for a long period of time, 

remove the batteries from the unit. Otherwise, the batteries 
will wear out, possibly resulting in a leakage of battery 
liquid that may damage the unit.

– Do not throw away batteries with general house waste. 

Dispose of them correctly in accordance with your local 
regulations.

22 Excessive sound pressure from earphones and headphones 

can cause hearing loss.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

This unit is not disconnected from the AC power source as 
long as it is connected to the wall outlet, even if this unit 
itself is turned off by 

. In this state, this unit is designed 

to consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC 
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR 
MOISTURE.

CAUTION

Danger of explosion if battery is incorrectly replaced. 
Replace only with the same or equivalent type.

There is a chance that placing this unit too close to a CRT-
based (Braun tube) TV set might impair picture color. 
Should this happen, move this unit away from the TV set.

Summary of Contents for TSX-B232
































Reviews: