21
En
En
You can set the time until the unit automatically enters standby mode.
USING THE SLEEP TIMER
1
Press
SNOOZE/SLEEP
a number of
times to set the time until the system
enters standby mode.
The sleep timer can be set to 30, 60, 90 and
120 minutes.
When the time is set, the sleep indicator (
) is
shown on the front panel display.
y
If you press
SNOOZE/SLEEP
while the sleep timer
is activated, the sleep timer setting will be canceled.
ADJUSTING BRIGHTNESS OF FRONT PANEL DISPLAY
1
Press
DIMMER
.
Each time the button is pressed, the setting
changes in the following order:
When AUTO is set, the brightness of the front panel
display is adjusted automatically with the illumination
sensor (
P. 5). Ensure that the sensor is not covered.
Top panel
1
SNOOZE/SLEEP
Sleep indicator
Top panel
1
DIMMER
A (auto) 3 (brightest) 2 1 (darkest)
back to A
Note
OTHER FUNCTIONS AND INFORMATION