Yamaha TRANSERVO SSC04, User Manual

Page: 54 / 80

Periodic Inspection and Maintenance
3
3-6 Replacing the motor
3-12
4) Remove the motor.
5) Install the new motor and secure it with the screws.
Reattach motor covers 1 and 2 by reversing their removal procedures. Use care to
avoid over-tightening the screws which secure motor covers 1 and 2.
c
CAUTION
When attaching motor cover 2, be sure that it is correctly aligned with the
grooves.
Motor cover 2 Motor cover 2
6) While pulling lightly on the shutter with the fingers, secure it by tightening the screw
until there is no looseness.
c
CAUTION
Do not press down on the shutter with excessive force.
Pressing down hard on the shutter may cause the shutter to warp.