Yamaha TRACER MTT850, Owner'S Manual

Page: 50 / 110

Instrument an d control functions
3-35
3
Re b oun d d ampin g force
To increase the rebound damping
force and thereby harden the rebound
damping, turn the adjusting screw in
direction (a). To decrease the rebound
damping force and thereby soften the
rebound damping, turn the adjusting
screw in direction (b).
TIP

When adjusting the damping force
settings, turn the adjuster in direc-
tion (a) until it stops, and then
count the turns in direction (b).

Although a damping force adjust-
er may turn beyond the stated
minimum settings, such adjust-
ments are ineffective and may
damage the suspension.
WARNING
EWA10222
This shock a b sor b er assem b ly con-
tains hi g hly pressurize d nitro g en
g as. Rea d an d un d erstan d the fol-
lowin g information b efore han d lin g
the shock a b sor b er assem b ly.

Do not tamper with or attempt
to open the cylin
d er assem b ly.

Do not su b ject the shock a b -
sor b er assem b ly to an open
flame or other hi g h heat source.
This may cause the unit to ex-
plo
d e d ue to excessive g as
pressure.

Do not d eform or d ama g e the
cylin d er in any way. Cylin d er
d ama g e will result in poor
d ampin g performance.

Do not d ispose of a d ama g e d or
worn-out shock a b sor b er as-
sem b ly yourself. Take the shock
a b sor b er assem b ly to a Yamaha
d ealer for any service.
1. Rebound damping force adjusting screw
Re b oun d d ampin g settin g :
Minimum (soft):
3 turn(s) in direction (b)
Standard:
1 1/2 turn(s) in direction (b)
Maximum (hard):
0 turn(s) in direction (b)
1 (a)
(b)
UB5CE1E0.book Page 35 Monday, August 6, 2018 1:13 PM