Yamaha TRACER MT09 TRA, Service Manual

Page: 158 / 560

PERIODIC MAINTENANCE
3-28
2. Remove:
•
Coolant reservoir bolt “1”
• Coolant reservoir cover “2”
•
Coolant reservoir “3”
• Collars “4”
3. Remove:
• Coolant reservoir cap “1”
4. Drain:
•
Coolant
(from the coolant reservoir)
5. Remove:
• Water pump drain bolt “1”
•
Copper washer “2”
6. Drain:
•
Coolant
(from the engine and radiator)
7. Install:
• Water pump drain bolt
•
Copper washer
8. Install:
•
Collars
• Coolant reservoir
•
Coolant reservoir cover
• Coolant reservoir bolt
9. Fill:
• Cooling system
(with the specified amount of the recom-
mended coolant)
Handling notes for coolant
Coolant is potentially harmful and should be
handled with special care.
WARNING
EWA13040
• If coolant splashes in your eyes, thorough-
ly wash them with water and consult a doc-
tor.
• If coolant splashes on your clothes, quickly
wash it away with water and then with soap
and water.
• If coolant is swallowed, induce vomiting
and get immediate medical attention.
NOTICE
ECA21291
• Adding water instead of coolant dilutes the
antifreeze concentration of the coolant. If
water is used instead of coolant; check,
2
1
3
1
1
2
4
3
4
1
1 2
Water pump drain bolt
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Coolant reservoir bolt (M5)
0.5 Nm (0.05 m·kgf, 0.36 ft·lbf)
Coolant reservoir bolt (M6)
9 Nm (0.9 m·kgf, 6.5 ft·lbf)
Recommended antifreeze
High-quality ethylene glycol anti-
freeze containing corrosion
inhibitors for aluminum engines
Mixing ratio
1:1 (antifreeze: water)
Radiator (including all routes)
1.93 L (2.04 US qt, 1.70 Imp.qt)
Coolant reservoir (up to the maxi-
mum level mark)
0.25 L (0.26 US qt, 0.22 Imp.qt)
New
T
R
.
.
T
R
.
.