Yamaha TNR-W Page 65 Manual Download

Page: 65 / 123

Parameter Settings

TENORI-ON Manual

Setting Parameters with the Jog Dial

■

File Menu

When the Song file has been loaded the display shown below will appear, and playback

will begin.

Press the [OK] button when you want to stop playback.

●

The composer name that appears on the third line of the display is the registered "Owner Name" for the
TENORI-ON on which the Song file was recorded (

➝

Page 107

●

Rename Song

Allows a new name to be entered for a Song file on an SD Memory Card.

Insert the SD Memory Card containing the file you want to rename into the TENORI-ON

card slot.

Use the jog dial and [OK] button to navigate to the Song function menu as follows:

"Main menu"

➝

"File menu"

➝

"Song"

Use the jog dial to highlight the "Rename" function, then press the [OK] button.

Song files on the card will appear as a list on the LCD display (with no file extension).

Use the jog dial to select the file you want to rename.

●

Only files that are in song-file format will be displayed.

Song: ∞

"0302E-SONG-02 "

TENORI-ON-MASTER

µ00:03:21 ≥

Composer Name

Song ∞

Operation:

Load

Song ∞

Operation:

Rename

Song: Rename ∞

0302E-SONG-01

0302E-SONG-02

0302G-SONG-01

Summary of Contents for TNR-W




























































































































Search results

Summary of Contents for TNR-W

Reviews:

Related manuals for TNR-W

Brands by name

Popular brands

Yamaha TNR-W, Manual

Search results

Summary of Contents for TNR-W

Reviews:

Related manuals for TNR-W

Brands by name

Popular brands