manualshive.com logo in svg

Yamaha Tmax XP500 2016, Owner'S Manual

Share
Download
Yamaha Tmax XP500 2016 Owner'S Manual Download Page 32

Instrument and control functions

4-7

1

2

3

4

5

6

7

8

9

10

11

12

13

14

1. Set the engine stop switch to “

”

and turn the power of the vehicle
on.

2. Check that the oil change indicator

comes on for a few seconds and
then goes off.

3. If the oil change indicator does not

come on, have a Yamaha dealer
check the electrical circuit.

V-belt replacement indicator
“V-Belt”

This indicator flashes every 20000 km
(12500 mi) when the V-belt needs to be
replaced.
After changing the V-belt, reset the
V-belt replacement indicator. To reset
the V-belt replacement indicator, select
it by pushing the “SELECT” button until
“V-Belt Trip” is displayed, and then
push the “SELECT” button at least one
second. When pushing the “SELECT”
button, “V-Belt Trip” starts flashing.
While “V-Belt Trip” is flashing, push the
“SELECT” button for at least three sec-
onds.
If the V-belt is changed before the
V-belt replacement indicator “V-Belt”
flashes (i.e. before the periodic V-belt
change interval has been reached), the
indicator “V-Belt” must be reset after

the V-belt change for the next periodic
V-belt change to be indicated at the
correct time.
The electrical circuit of the indicator can
be checked according to the following
procedure.

1. Turn the vehicle on and make sure

that the engine stop switch is set to
“

”.

2. Check that the V-belt replacement

indicator comes on for a few sec-
onds and then goes off.

3. If the V-belt replacement indicator

does not come on, have a Yamaha
dealer check the electrical circuit.

Ambient temperature display, aver-
age fuel consumption, and instan-
taneous fuel consumption modes

Push the “RESET” button to switch the
display between the ambient tempera-
ture display “Air”, the average fuel con-
sumption mode “AVE_ _._ km/L” or
“AVE_ _._ L/100 km”, and the instanta-
neous fuel consumption mode “km/L”
or “L/100 km” in the following order:

Air 

 AVE_ _._ km/L or AVE_ _._

L/100 km 

 km/L or L/100 km 

 Air

1. V-belt replacement indicator “V-Belt”

1

1. Ambient temperature/average fuel 

consumption/instantaneous fuel 
consumption

1

2PW-9-E1.book  7 ページ  ２０１５年９月１０日　木曜日　午後５時１７分

Summary of Contents for Tmax XP500 2016















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands