manualshive.com logo in svg

Yamaha Tmax XP500 2016, Owner'S Manual

Share
Download
Yamaha Tmax XP500 2016 Owner'S Manual Download Page 18

Smart key system

3-4

1

2

3

4

5

6

7

8

9

10

11

12

13

14

the mechanical key are both lost or
damaged, and there is no record of the
identification number, the entire smart
key system will need to be replaced.

TIP

The identification number can also be
found on the inside of the smart key it-
self.

NOTICE

ECA21573

The smart key has precision elec-
tronic components. Observe the fol-
lowing precautions to prevent
possible malfunction or damage.

Do not place or store the smart
key in a storage compartment.
The smart key may be damaged
from road vibrations or exces-
sive heat.

Do not drop, bend, or subject
the smart key to strong impacts.

Do not submerge the smart key
in water or other liquids.

Do not place heavy items or ex-
cessive stress on the smart key.

Do not leave the smart key in a
place exposed to direct sun-
light, high temperature or high
humidity.

Do not grind or attempt to mod-

ify the smart key.

Keep the smart key away from
strong magnetic fields and mag-
netic objects such as key hold-
ers, TVs, and computers.

Keep the smart key away from
electric medical equipment.

Do not allow oils, polishing
agents, fuel, or any strong
chemicals to come in contact
with the smart key. The smart
key body may become discol-
ored or cracked.

TIP

The smart key battery life is ap-
proximately two years, but this
may vary according to operating
conditions.

The smart key battery may be-
come discharged even if it is away
from the vehicle and not being
used.

If the smart key continually re-
ceives radio waves, the smart key
battery will discharge quickly. (For
example, when placed in the vicin-
ity of electrical products such as
televisions, radios, or computers.)

Replace the smart key battery when
the smart key system indicator light
flashes for about 20 seconds when the
power of the vehicle is turned on or
when the smart key indicator light does
not come on when the “ON/OFF”
switch is pushed. (See page 3-6.) After
changing the smart key battery, if the
smart key system still does not operate,
have a Yamaha dealer check the vehi-
cle.

1. Identification number

1

1

2PW-9-E1.book  4 ページ  ２０１５年９月１０日　木曜日　午後５時１７分

Summary of Contents for Tmax XP500 2016















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands