Yamaha Tenere 700 2023 Owner'S Manual Download

Page: 28 / 114

Instrument an

control functions

4-10

If the message “Hi” flashes, stop the
vehicle, then stop the engine, and let it
cool. (See page 7-39.)

TIP



When the coolant temperature is
below 104 °F, “Lo” will be dis-
played.



The coolant temperature varies
with changes in the weather and
engine load.

EAU90684

Air temperature

isplay

This display shows the air temperature
from 16 °F to 210 °F in 1 °F increments.
The temperature displayed may vary
from the actual ambient temperature.

TIP

When the temperature is below 16 °F,
“Lo” will be displayed.

EAU90700

Bri

htness control mo

The brightness level of the multi-func-
tion meter unit panel can be adjusted.

To adjust the brightness

1. Turn the vehicle power off.
2. Push and hold the top set button.
3. Turn the vehicle power on and

continue pushing the top set but-
ton until the display switches to
the brightness control mode.

4. Push the bottom set button to set

the brightness level.

5. Push the top set button to confirm

the selected brightness level and
exit the brightness control mode.

TIP

There are 6 brightness level settings.

1. Air temperature display

1. Brightness level display

UBMB10E0.book Page 10 Monday, August 22, 2022 1:08 PM

Summary of Contents for Tenere 700 2023



















































































































Search results

Summary of Contents for Tenere 700 2023

Reviews:

Related manuals for Tenere 700 2023

Brands by name

Popular brands

Yamaha Tenere 700 2023, Owner'S Manual

Search results

Summary of Contents for Tenere 700 2023

Reviews:

Related manuals for Tenere 700 2023

Brands by name

Popular brands