background image

Instrument an

d

 control functions

4-1

4

EAU10462

Main switch/steerin

g

 lock

The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering. The various
positions are described below.

EAU85050

ON

All electrical circuits are supplied with
power and the vehicle lights are turned
on. The engine can be started. The key
cannot be removed.

TIP

To prevent battery discharge, do
not leave the key in the on position
without the engine running.

The headlight comes on automat-
ically when the engine is started.

The headlight will stay on until the
key is turned to “OFF”, even if the
engine stalls.

EAU10664

OFF

All electrical systems are off. The key
can be removed.

WARNING

EWA10062

Never turn the key to “OFF” or
“LOCK” while the vehicle is movin

g

.

Otherwise the electrical systems will

b

e switche

d

 off, which may result in

loss of control or an acci

d

ent.

EAU73803

LOCK

The steering is locked and all electrical
systems are off. The key can be re-
moved.

To lock the steering

1. Turn the handlebars all the way to

the left.

2. With the key in the “OFF” position,

push the key in and turn it to
“LOCK”.

3. Remove the key.

TIP

If the steering will not lock, try turning
the handlebars back to the right slight-
ly.

ON

OFF

LOCK

1. Push.
2. Turn.

1

2

UBMB10E0.book  Page 1  Monday, August 22, 2022  1:08 PM

Summary of Contents for Tenere 700 2023



















































































































Reviews: