Instrument an
d
control functions
4-33
4
3. Install the rider seat height posi-
tion adjuster so that the match
mark is aligned with the “H” mark
as shown.
4. Insert the projection on the rear of
the rider seat into seat holder B as
shown.
TIP
Make sure that the rider seat is proper-
ly secured before riding.
EAU58982
Win
d
shiel
d
To suit the rider’s preference, the wind-
shield can be changed to one of four
positions.
To a
d
just the win
d
shiel
d
hei
g
ht
1. Loosen the windshield height po-
sition adjusting knob on each side
of the windshield until resistance
is felt.
NOTICE:
Do not continue
turnin
g
the kno
b
after resis-
tance is felt. Otherwise, the
kno
b
coul
d
b
e
d
ama
g
e
d
.
[ECA20211]
2. Pull the slide plate holders out-
ward, and then adjust the height of
the windshield.
1. Rider seat height position adjuster
1. Rider seat height position adjuster
2. “H” mark
3. Match mark
1
2
3
1
1. Projection
2. Seat holder B (for high position)
1
2
1. Windshield height position adjusting knob
1
U2BS73E0.book Page 33 Monday, September 12, 2016 2:14 PM
