Instrument an
d
control functions
4-27
4
pin
g
. As with any motorcycle, ap-
proach surfaces that may
b
e
slippery with caution an
d
avoi
d
es-
pecially slippery surfaces.
There are three traction control system
modes:
“TCS 1”: Default mode
“TCS 2”: Sporty mode
This mode decreases traction
control system assist, allowing the
rear wheel to spin more freely than
“TCS 1”.
“TCS OFF”: The traction control
system is turned off. The system
may also be automatically dis-
abled in some riding conditions
(see “Resetting” on page 4-27).
When the key is turned to “ON”, the
traction control system is enabled and
“TCS 1” is displayed in the multi-func-
tion meter.
The traction control system mode can
be changed only when the key is in the
“ON” position and the vehicle is not
moving.
TIP
Use the mode “TCS OFF” to help free
the rear wheel if the motorcycle gets
stuck in mud, sand, or other soft sur-
faces.
NOTICE
ECA16801
Use only the specifie
d
tires. (See
pa
g
e 7-19.) Usin
g
d
ifferent size
d
tires will prevent the traction control
system from controllin
g
tire rotation
accurately.
Settin
g
the traction control system
WARNING
EWA15441
Be sure to stop the vehicle
b
efore
makin
g
any settin
g
chan
g
es to the
traction control system. Chan
g
in
g
settin
g
s while ri
d
in
g
can
d
istract the
operator an
d
increase the risk of an
acci
d
ent.
Push the “TCS” button on the multi-
function meter for less than one se-
cond to change between the modes
“1” and “2”. Push the button for at least
two seconds to select the mode “TCS
OFF” and turn the traction control sys-
tem off. Push the button again to return
to the previously selected mode “1” or
“2”.
Resettin
g
The traction control system will be dis-
abled in the following conditions:
The rear wheel is rotated with the
centerstand down and the key in
the “ON” position.
Either the front wheel or rear wheel
comes off the ground while riding.
Excessive rear wheel spinning
1. “TCS” button
2. Traction control system indicator
1
2
U2BS73E0.book Page 27 Monday, September 12, 2016 2:14 PM