Instrument an
d
control functions
4-34
4
EAU58982
Win
d
shiel
d
To suit the rider’s preference, the wind-
shield can be changed to one of four
positions.
To a
d
just the win
d
shiel
d
hei
g
ht
1. Loosen the windshield height po-
sition adjusting knob on each side
of the windshield until resistance
is felt.
NOTICE:
Do not continue
turnin
g
the kno
b
after resis-
tance is felt. Otherwise, the
kno
b
coul
d
b
e
d
ama
g
e
d
.
[ECA20211]
2. Pull the slide plate holders out-
ward, and then adjust the height of
the windshield.
3. Align the slide plate holders with
the match marks at the desired
position.
TIP
Make sure that the slide plate
holders are aligned with the match
marks at the same height on both
sides of the windshield.
Make sure that the projection on
each slide plate holder fits into the
corresponding hole in the slide
plate.
4. Tighten the adjusting knobs.
1. Windshield height position adjusting knob
1. Slide plate holder
1
1
1. Match mark
2. Slide plate
2
1
UBUY10E0.book Page 34 Tuesday, October 4, 2022 10:55 AM
