Instrument an
d
control functions
4-23
4
EAU12833
Clutch lever
The clutch lever is located on the left
side of the handlebar. Pull the clutch
lever to disengage the engine from the
drivetrain. Release the lever to engage
the clutch and transmit power to the
rear wheel.
TIP
The lever should be pulled rapidly
and released slowly for smooth
shifting. (See page 6-3.)
The clutch lever is equipped with a
switch, which is part of the ignition
circuit cut-off system. (See page
4-42.)
The position of the clutch lever can be
adjusted. To adjust the distance be-
tween the clutch lever and the handle-
bar, gently push the lever away from
the handlebar and rotate the position
adjusting dial.
TIP
Make sure the setting number on the
position adjusting dial aligns with the
match mark.
EAU12876
Shift pe
d
al
The shift pedal is located on the left
side of the motorcycle. To shift the
transmission to a higher gear, move
the shift pedal up. To shift the trans-
mission to a lower gear, move the shift
pedal down. (See page 6-3.)
1. Clutch lever
2. Clutch lever position adjusting dial
3. Match mark
4. Distance
1
2
3
4
1
4
3
2
1. Shift pedal
1
UBUY10E0.book Page 23 Tuesday, October 4, 2022 10:55 AM
