●
Playback
●
17
5.
Press
[-1]
or
[+1]
to set the digital volume to an appropriate value. This setting
determines the level at which the signal reproduces internally. You generally
want to set the level to just below the
clipping level, as described in the box
below.
ABOUT CLIPPING
Setting the digital volume too high may cause clipping, resulting in distorted sound.
Clipping may also occur when you play many pads together, or when you change
filter values during FILTER or EXTERNAL FILTER playback. If you notice dis-
torted sound during playback, press
[-1]
to lower the digital volume. Note that reduc-
ing the level with the volume slider or on your external speakers will not eliminate
clipping.
Basic Sample Playback
Your SU10 stores up to 48 samples: four banks of 12 samples each. The following
procedure shows how to replay these samples.
1.
Select the bank by pressing the
[BANK]
button.
Let’s begin with a pad from bank A. Under factory settings the SU10 starts up
in bank A, but try pressing
[BANK]
a few times anyway. Stop when you see an
A in the Bank Indicator area of the LCD.
Select bank A
BANK
