manualshive.com logo in svg

Yamaha SU-10, Owner'S Manual, Page: 81 / 89

Share
Download
Yamaha SU-10 Owner'S Manual Download Page 81

74

●

 Specifications 

●

12

Specifications

1. Main Specifications

Features

• Compact low-cost sampling module. (Same size as VHS cassette)
• Special playback features unprecedented for this price range: REVERSE, SCALE,

PITCH, others.

• Touch-driven ribbon controller controls any one of various effects; excellent for

realtime performance applications.

• Custom LCD indicates full status information (sampling grade, current song,

selected input source, and much more).

Maximum polyphony

4 samples (monaural)

Maximum number of samples

48

Play modes

Sampler, Realtime Scratch,
Realtime Filter

Special effects

Low-pass, band-pass, and high-pass filters (all
with resonance); crossfade; pitch

Songs

Records up to 4 songs. (Each song is a recorded
sequence of pad and button operations.)

Interfaces

MIDI IN, MIDI OUT: Connects to MIDI se-
quencer, MIDI keyboard, etc.
Can dump individual sample(s) in MSDS (MIDI
Sample Dump Standard) format to supporting
RAM-equipped devices (synthesizer, sampler,
computer, etc.)
LINE IN accepts input from CD player or other
audio device.
MIC INPUT accepts input from dynamic micro-
phone or powered condenser microphone.

Demo songs

1 demo song is included.

2. Memory capacity

Wave (sample) memory

384KB (Can record up to about 53 seconds of
monaural sound at Extra Long sampling grade.)

Song memory

8KB (Approx. 1000 events)

Summary of Contents for SU-10


























































































Reviews:

No comments