INSTRUMENT AND CONTROL FUNCTIONS
4-6
4
To set the brightness
1. Turn the key to “OFF”.
2. Push and hold the “SELECT”
switch.
3. Turn the key to “ON”, and then re-
lease the “SELECT” switch after
five seconds.
4. Adjust the multi-function meter unit
panel brightness level by pushing
the “SELECT” switch.
5. Push the “RESET” switch.
The odometer/tripmeter/clock dis-
play will return to the prior mode.
EAU12348
Handlebar switches
Left
Right
EAU12400
Dimmer switch “
/
”
Set this switch to “
” for the high
beam and to “
” for the low beam.
EAU12430
Turn signal switch “
/
”
To signal a right-hand turn, push this
switch to “
”. To signal a left-hand
turn, push this switch to “
”. When re-
leased, the switch returns to the center
position.
Since this model is equipped with a
self-canceling system, the turn signal
lights will self-cancel after the vehicle
1. Dimmer switch “
/
”
2. Turn signal switch “
/
”
3. Horn switch “
”
2
3
1
1. Engine stop switch “
/
”
2. “SELECT” switch
3. “RESET” switch
4. Start switch “
”
1
2
3
4
U5S713E0.book Page 6 Wednesday, May 25, 2011 1:06 PM
