Yamaha Star V19SX Owner'S Manual Download

Page: 80 / 96

SPECIFICATIONS

8-1

Dimensions:

Overall length:

2580 mm (101.6 in)

Overall width:

1100 mm (43.3 in)

Overall height:

1100 mm (43.3 in)

Seat height:

705 mm (27.8 in)

Wheelbase:

1715 mm (67.5 in)

Ground clearance:

155 mm (6.10 in)

Minimum turning radius:

3480 mm (137.0 in)

Weight:

With oil and fuel:

340.0 kg (750 lb)

Engine:

Engine type:

Air cooled 4-stroke, OHV

Cylinder arrangement:

V-type 2-cylinder

Displacement:

1854.0 cm³

Bore

stroke:

100.0

118.0 mm (3.94

4.65 in)

Compression ratio:

9.48 :1

Starting system:

Electric starter

Lubrication system:

Dry sump

Engine oil:

Type:

YAMALUBE 4 (20W40) or SAE20W40

Recommended engine oil grade:

API service SG type or higher, JASO
standard MA

Engine oil quantity:

Without oil filter cartridge replacement:

4.10 L (4.33 US qt) (3.61 Imp.qt)

With oil filter cartridge replacement:

4.90 L (5.18 US qt) (4.31 Imp.qt)

Transfer gear oil:

Type:

SAE80 API GL-4 Hypoid gear oil

Quantity:

0.55 L (0.58 US qt) (0.48 Imp.qt)

Air filter:

Air filter element:

Oil-coated paper element

Fuel:

Recommended fuel:

Premium unleaded gasoline only

Fuel tank capacity:

17.0 L (4.49 US gal) (3.74 Imp.gal)

Fuel reserve amount:

3.0 L (0.79 US gal) (0.66 Imp.gal)

Fuel injection:

Throttle body:

Manufacturer:

MIKUNI

Type/quantity:

AC43/2

Spark plug (s):

Manufacturer/model:

NGK/DPR8EA-9

Manufacturer/model:

DENSO/X24EPR-U9

Spark plug gap:

0.8–0.9 mm (0.031–0.035 in)

Clutch:

Clutch type:

Wet, multiple-disc

Transmission:

Primary reduction system:

Spur gear

Primary reduction ratio:

72/51 (1.412)

Secondary reduction system:

Belt drive

Secondary reduction ratio:

37/30

70/31 (2.785)

Transmission type:

Constant mesh 5-speed

Operation:

Left foot operation

Gear ratio:

1st:

38/16 (2.375)

2nd:

33/21 (1.571)

3rd:

29/25 (1.160)

4th:

26/28 (0.929)

5th:

24/30 (0.800)

U1D712E0.book Page 1 Wednesday, July 11, 2007 9:19 AM

Summary of Contents for Star V19SX

































































































Search results

Summary of Contents for Star V19SX

Reviews:

Related manuals for Star V19SX

Brands by name

Popular brands

Yamaha Star V19SX, Owner'S Manual

Search results

Summary of Contents for Star V19SX

Reviews:

Related manuals for Star V19SX

Brands by name

Popular brands