Yamaha STAGEPAS 600BT, Owner'S Manual

Page: 5 / 32

English
STAGEPAS 600BT/STAGEPAS 400BT Owner’s Manual
5
NOTICE
To avoid the possibility of malfunction/ dama g e to the
product, dama g e to data, or dama g e to other
property, follow the notices below.
■
Handlin g and maintenance
• Do not expose the device to excessive dust or vibration,
or extreme cold or heat (such as in direct sunlight, near a
heater, or in a car during the day), in order to prevent the
possibility of panel disfiguration, unstable operation, or
damage to the internal components.
• Do not place vinyl, plastic or rubber objects on the device,
since this might discolor the panel.
• When cleaning the device, use a dry and soft cloth. Do not
use paint thinners, solvents, cleaning fluids, or chemical-
impregnated wiping cloths.
• Condensation can occur in the device due to rapid,
drastic changes in ambient temperature—when the
device is moved from one location to another, or air
conditioning is turned on or off, for example. Using the
device while condensation is present can cause damage.
If there is reason to believe that condensation might have
occurred, leave the device for several hours without
turning on the power until the condensation has
completely dried out.
• Protection Circuit: This speaker system has an internal
protection circuit that shuts off the speaker unit when an
excessive input signal is applied. If the speaker unit emits
no sound, reduce the volume level of the amplifier
immediately. The sound will return automatically in several
seconds.
• When placing the speaker face down, always place it on a
flat surface.
• Do not touch the speaker driver unit.
• The rubber feet included in this package can be attached
to the speaker to prevent slippage when it is to be used on
a slippery surface.
• Air blowing out of the bass reflex ports is normal, and
often occurs when the speaker is handling program
material with heavy bass content.
• Always turn the power off when the device is not in use.
■
Connectors
• XLR-type connectors are wired as follows (IEC60268
standard):
pin 1: ground
pin 2: hot (+)
pin 3: cold (–).
Information
■
About this manual
• The illustrations as shown in this manual are for
instructional purposes only.
• The company names and product names in this manual
are the trademarks or registered trademarks of their
respective companies.
■
About disposal
• This product contains recyclable components.
When disposing of this product, please contact the
appropriate local authorities.
The Bluetooth
®
word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Yamaha Corporation is under license.
The model number, serial number, power requirements, etc., may be
found on or near the name plate, which is at the bottom of the unit.
You should note this serial number in the space provided below and
retain this manual as a permanent record of your purchase to aid iden-
tification in the event of theft.
Model No.
Serial No.
(bottom_en_01)