background image

1

En

• To assure the finest performance, please read this 

manual carefully. Keep it in a safe place for future 
reference.

• Install this unit in a well ventilated, cool, dry, clean 

place - away from direct sunlight, heat sources, 
vibration, dust, moisture, and/or cold. For proper 
ventilation, allow the following minimum 
clearances (excludes a TV placed on top of this 
unit).
Top: 5 cm (2 in), Rear: 5 cm (2 in), Sides: 5 cm 
(2 in)

• Locate this unit away from other electrical 

appliances, motors, or transformers to avoid 
humming sounds.

• Do not expose this unit to sudden temperature 

changes from cold to hot, and do not locate this 
unit in an environment with high humidity (i.e. a 
room with a humidifier) to prevent condensation 
inside this unit, which may cause an electrical 
shock, fire, damage to this unit, and/or personal 
injury.

• Avoid installing this unit where foreign objects 

may fall onto this unit and/or this unit may be 
exposed to liquid dripping or splashing. On the top 
of this unit, do not place:

Other components, as they may cause damage 
and/or discoloration on the surface of this unit.

Burning objects (i.e. candles), as they may cause 
fire, damage to this unit, and/or personal injury.

Containers with liquid in them, as they may fall 
and liquid may cause electrical shock to the user 
and/or damage to this unit.

• Do not cover this unit with a newspaper, 

tablecloth, curtain, etc., in order not to obstruct 
heat radiation. If the temperature inside this unit 
rises, it may cause fire, damage to this unit, and/or 
personal injury.

• Do not plug in this unit to a wall outlet until all 

connections are complete.

• Do not operate this unit upside-down. It may 

overheat, possibly causing damage.

• Do not use force on switches, knobs and/or cords.
• When disconnecting the power cable from the wall 

outlet, grasp the plug; do not pull the cable.

• Do not clean this unit with chemical solvents; this 

might damage the finish. Use a clean, dry cloth.

• Only voltage specified on this unit must be used. 

Using this unit with a higher voltage than specified 
is dangerous and may cause fire, damage to this 
unit, and/or personal injury. Yamaha will not be 

held responsible for any damage resulting from use 
of this unit with a voltage other than specified.

• To prevent damage by lightning, keep the power 

cable and outdoor antennas disconnected from a 
wall outlet or the unit during a lightning storm.

• Do not attempt to modify or fix this unit. Contact 

qualified Yamaha service personnel when any 
service is needed. The cabinet should never be 
opened for any reasons.

• When not planning to use this unit for long periods 

of time (i.e. vacation), disconnect the AC power 
plug from the wall outlet.

• Be sure to read the “Troubleshooting” section on 

common operating errors before concluding that 
this unit is faulty.

• Before moving this unit, press   to set this unit in 

standby mode, and disconnect the power supply 
cable from the wall outlet.

• Condensation will form when the surrounding 

temperature changes suddenly. Disconnect the 
power supply cable from the outlet, then leave the 
unit alone.

• Install this unit near the wall outlet and where the 

AC power plug can be reached easily.

• The batteries shall not be exposed to excessive 

heat such as sunshine, fire or like.

• Secure placement or installation is the owner’s 

responsibility. Yamaha shall not be liable for any 
accident caused by improper placement or 
installation of speakers.

Notes on remote controls and batteries

• Do not spill water or other liquids on the remote 

control.

• Do not drop the remote control.
• Do not leave or store the remote control in the 

following places:

places of high humidity, such as near a bath

places of high temperatures, such as near a 
heater or a stove

places of extremely low temperatures

dusty places

• Do not expose the remote control sensor of this 

unit to direct sunlight or lighting such as inverted 
fluorescent lamps.

• If the batteries grow old, the effective operation 

range of the remote control decreases 

considerably. If this happens, replace the batteries 
with two new ones as soon as possible.

• Do not use old batteries together with new ones.
• Do not use different types of batteries (such as 

alkaline and manganese batteries) together. Read 
the packaging carefully as these different types of 
batteries may have the same shape and color.

• Exhausted batteries may leak. If the batteries have 

leaked, dispose of them immediately. Avoid 
touching the leaked material or letting it come into 
contact with clothing, etc. Clean the battery 
compartment thoroughly before installing new 
batteries.

• Do not carry batteries in a pocket or purse with 

metal objects like coins, etc.

• Do not throw away batteries with general house 

waste. Dispose of them correctly in accordance 
with your local regulations.

• Keep batteries away from children. If a battery is 

accidentally swallowed, contact your doctor 
immediately.

• When not planning to use the remote control for 

long periods of time, remove the batteries from the 
remote control.

• Do not charge or disassemble the supplied 

batteries.

FOR U.K. CUSTOMERS

If the socket outlets in the home are not suitable for 
the plug supplied with this appliance, it should be cut 
off and an appropriate 3 pin plug fitted. For details, 
refer to the instructions described below.

NOTE

The plug severed from the mains lead must be 
destroyed, as a plug with bared flexible cord is 
hazardous if engaged in a live socket outlet.

SPECIAL INSTRUCTIONS FOR U.K. 
MODEL

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

WARNING

TO REDUCE THE RISK OF FIRE OR 
ELECTRIC SHOCK, DO NOT EXPOSE THIS 
UNIT TO RAIN OR MOISTURE.

As long as this unit is connected to the AC wall 
outlet, it is not disconnected from the AC power 
source even if you turn off this unit by  . In this 
state, this unit is designed to consume a very 
small quantity of power.

 (Power key)

Turns on the power of this unit or sets it to the 
standby mode.

Do not use this unit within 22 cm (9 inches) of 
persons with a heart pacemaker implant or 
defibrillator implant.

Radio waves may affect electro-medical devices.
Do not use this unit near medical devices or 
inside medical facilities.

We, Yamaha Music Europe GmbH hereby 
declare that this unit is in compliance with the 
essential requirements and other relevant 
provisions of Directive 1999/5/EC.

IMPORTANT

THE WIRES IN THE MAINS LEAD ARE 
COLOURED IN ACCORDANCE WITH THE 
FOLLOWING CODE:

Blue: NEUTRAL
Brown: LIVE

As the colours of the wires in the mains lead of 
this apparatus may not correspond with the 
coloured markings identifying the terminals in 
your plug, proceed as follows:
The wire which is coloured BLUE must be 
connected to the terminal which is marked with 
the letter N or coloured BLACK. The wire which 
is coloured BROWN must be connected to the 
terminal which is marked with the letter L or 
coloured RED.
Making sure that neither core is connected to the 
earth terminal of the three pin plug.

Summary of Contents for SRT-1000BL



























Reviews: