–13–
CYLINDER HEAD
ENG
NOTE:
CAUTION:
3. Install:
S
Cam sprocket
S
Timing chain
Installing steps:
S
Turn the crank shaft counterclockwise until the
slit
1
matches the stationary pointer
2
.
S
Align the dowel pin
3
on the camshaft with the
stationary pointer
4
on the cylinder head.
S
Align the “I” mark
5
on the cam sprocket with
the stationary pointer
6
on the cylinder head.
S
Fit the timing chain
7
onto cam sprocket
8
and install the cam sprocket on the camshaft.
When installing the cam sprocket, keep the tim-
ing chain as tight as possible on the exhaust
side.
Do not turn the crankshaft during installa-
tion of the camshaft. Damage or improper
valve timing will result.
S
Remove the safety wire from the timing
chain.
4. Install:
S
Plate washer
S
Bolt (timing chain)
5. Install:
S
timing chain tensioner
a. Lightly press the timing chain tensioner rod
into the timing chain tensioner housing by
hand.
b. While pressing the timing chain tensioner
rod, wind it clockwise with a thin screwdriver
1
until it stops.
c. With the screwdriver still inserted into the
timing chain tensioner, install the timing
chain tensioner
2
, gasket
3
onto the cylin-
der block. Then, tighten the timing chain ten-
sioner bolts
4
to the specified torque.
