88
En
Remote control features
■
Programming macro operations
You can program your own macro to transmit several
remote control commands in sequence at the press of a
button. Be sure to set up remote control codes or perform
learning operations before programming the macro.
• The default macro is not cleared when a new macro is
programmed for a button. The default macro can be used again
when the programmed macro is cleared.
• It is not possible to add a new signal (macro step) to the default
macro. Programming a macro changes all macro contents.
• We do not recommend that you program continuous operations
(for example, volume control) in a macro.
1
Press
F
SETUP
using a ballpoint pen or
similar object.
“SETUP” appears in the display window (
4
).
2
Press
8
k
/
n
repeatedly to select “MACRO”
and then press
8
ENTER
.
3
Press the desired macro button you want to
assign the macro program to and then press
8
ENTER
.
“M:the three-letter name of the selected macro
button” (for example, “M:DVD”) and the name of the
currently selected control area appears in the display
window (
4
) alternately.
When you press
C
STANDBY
or
D
POWER
,
“M:STB” or “M:PWR” and the name of the currently
selected control area appears in the display window
(
4
) alternately.
4
Press the buttons for the functions you want
to include in the macro operation in
sequence.
Example
Set the input source to DVD
→
Turn on the DVD
player
→
Turn on the video monitor
Step 1 (“MCR1”): Press DVD.
Step 2 (“MCR2”): Press AV POWER.
Step 3 (“MCR3”): Press TV POWER.
• To change the selected input area, press
5
SELECT
l
/
h
.
Pressing the input selector buttons will program a macro step,
whereas
5
SELECT
l
/
h
only changes the selected input area.
• The position of the operation mode selector (AMP/TV/
SOURCE) affects the assigned function. When the
operation mode selector is set to
E
AMP
or
E
TV
, the
input source selectors do not function.
5
Press
G
MACRO
to confirm the program.
You can set up to 10 steps (10 functions). After you
have set 10 steps, “FULL” appears and the remote
control automatically exits from the macro
programming mode.
6
Press
F
SETUP
again to exit from the setup
mode.
“ERROR” appears in the display window (
4
) if you press
more than one button simultaneously.
Notes
Notes
Note
Indicates the number of macro
steps entered
Flashes alternately so you can set the
next step
(Selected macro button)
(Selected control area)
MCR 1
M:DVD
DVD
DVD
CD
V-AUX
DOCK
MULTI
PHONO
AV
POWER
TV
POWER
TV
DVR
VCR
USB
TUNER
BD
HD DVD
MD
CD-R
CBL
SAT
STANDBY
POWER
B
A
1
2
3
