background image

Precautions for remote control batteries

Before replacing the remote control battery with a new one, be sure to read the following precautions. Be
sure to follow the precautions.

WARNING

• The remote control supplied with this product contains a coin/button cell battery. Do not ingest the coin/button battery. Keep

new and used batteries away from children. If the battery compartment does not close securely, keep it away from children. If
the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. If you think
batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

• Do not dispose of a battery in fire. Do not expose a battery to high temperatures, such as direct sunlight or a fire. Do not charge

the supplied battery. The battery could burst or leak, causing a fire or injury.

• Do not disassemble a battery. If the battery leaks, avoid contact with the leaked fluid. If the contents of the battery get on your

hands or in your eyes, it can cause blindness or chemical burns. If the battery fluid should come in contact with your eyes,
mouth, or skin, wash immediately with water and consult a doctor.

CAUTION

• Do not use a battery other than the specified one. Doing so may cause fire or burns, or result in fluid leakage that may cause

skin inflammation.

• Always make sure the battery is inserted in conformity with the +/- polarity markings. Failure to do so might result in a fire,

burns, or inflammation due to fluid leaks.

• When the battery runs out, or if the sound bar is not to be used for a long time, remove the battery from the remote control to

prevent possible leakage of the battery fluid.

• Do not put in a pocket or bag, carry, or store batteries together with pieces of metal. The battery could short, burst, or leak,

causing a fire or injury.

• When storing or discarding batteries, insulate the terminal area by applying tape, or some other protection. Mixing them with

other batteries or metal objects can cause a fire, burns, or inflammation due to fluid.

70

TROUBLESHOOTING > Other actions

Summary of Contents for SR-B20A




























































































Reviews: