manualshive.com logo in svg

Yamaha SPX2000 Editor, Owner'S Manual

The Yamaha SPX2000 Editor is an innovative audio effects processor designed to elevate your sound production. Unlock its full potential by accessing the comprehensive Owner's Manual, available for free download on our website. Discover endless possibilities and refine your audio creations with this exceptional device.

Share
Download
background image

SPX2000—Owner’s Manual

   55

Modulation

Auto Pan (PRESET bank)

This effect cyclically moves the pan position of the sound.
Each aspect of the sound is controlled by the following effect parameters.

Modulation: 

FREQ., DEPTH, WAVE, DIR.

Filter/Equalizer:

 LSH G, LSH F, EQ G, EQ F, EQ Q, HSH G, HSH F

Tempo synchronization:

 SYNC, NOTE, TEMPO

Output level: 

OUT LVL, MIX BAL.

Parameter details

■

Basic parameters

■

Fine parameters

Effect list

The following tables show the default parameter values for the effect belonging to the Auto Pan type (PRESET bank).

■

Basic parameters

■

Fine parameters

Parameter name

Range

Explanation

FREQ.

0.05—40.00 Hz

Speed of modulation (panning movement). Increasing this value will make the panning movement 
faster.

DEPTH

0—100%

Modulation depth. Increasing this value will produce greater movement between left and right.

WAVE

Sine, Tri, Square

Waveform of the modulation signal. This will affect the character of the modulation.
You can choose Sine (sine wave), Tri (triangle wave), or Square (square wave).

DIR.

L<->R, L-->R, L<--R, Turn L, 

Turn R

Direction of panning movement. L<->R makes the sound move alternately between the L and R 
channels. L-->R makes the sound move from L to R and then jump back to L; L<--R does the 
opposite. Turn L or Turn R makes the sound rotate toward the left or right.

Parameter name

Range

Explanation

MIX BAL.

0—100%

Balance between the original sound and effect sound. At a setting of 0% only the original sound 
will be output; at a setting of 100% only the effect sound will be output.

OUT LVL

0—100%

Output level after the original sound and effect sound are mixed. Decrease this value if you want to 
lower the output. At a setting of 0% there will be no output.

LSH G

–12.0—+12.0 dB

Gain of the low shelving filter. This adjusts the volume of the low-frequency region. Positive (+) 
settings will boost the low-frequency region, and negative (–) settings will attenuate it.

LSH F

21.2 Hz—8.00 kHz

Frequency of the low shelving filter. The LSH G gain applies to the frequency region below this set-
ting.

EQ G

–12.0—+12.0 dB

Gain of the equalizer (peaking type). This adjusts the gain of the frequency region specified by EQ 
F. Positive (+) settings will boost the region, and negative (–) settings will attenuate it.

EQ F

100 Hz—8.00 kHz

Frequency of the equalizer (peaking type). The EQ G gain setting will affect the region around this 
frequency.

EQ Q

10.0—0.10

Q (sharpness) of the equalizer (peaking type). This indicates the sharpness of the equalizer fre-
quency response curve. Higher values will produce a sharper curve.

HSH G

–12.0—+12.0 dB

Gain of the high shelving filter. This adjusts the volume of the high-frequency region. Positive (+) 
settings will boost the high-frequency region, and negative (–) settings will attenuate it.

HSH F

50.0 Hz—16.0 kHz

Frequency of the high shelving filter. The HSH G gain applies to the frequency region above this 
setting.

SYNC

ON, OFF

Switches tempo synchronization on/off. If this is ON, the modulation speed will synchronize to the 
tempo synchronization source specified by “TEMPO SOURCE” (see page 23). The NOTE value 
will be set to the synchronized tempo value.

NOTE

*a

*a.

This parameter is used for tempo synchronization. If SYNC is ON, the FREQ. value will be set 
according to this value and the TEMPO value. This value is ignored if SYNC is OFF.

TEMPO

25—300

This parameter is used for tempo synchronization. If SYNC is ON, the FREQ. value will be set 
according to this value and NOTE. This value is ignored if SYNC is OFF.

No

Effect name

FREQ.

DEPTH

WAVE

DIR.

72

AUTO PAN

1.55 Hz

100%

Sine

L<->R

No

Effect name

MIX BAL.

OUT LVL

LSH G

LSH F

EQ G

EQ F

EQ Q

HSH G

HSH F

72

AUTO PAN

100%

100%

0.0 dB

125 Hz

0.0 dB

1.00 kHz

10.0

0.0 dB

10.0 kHz

SYNC

NOTE

TEMPO

OFF

—

Summary of Contents for SPX2000 Editor













































































































Reviews:

No comments

Related manuals for SPX2000 Editor

FOR-A USF-105AS Operation Manual preview
USF-105AS
Brand: FOR-A Pages: 39
Supero Supero SAS-826A User Manual preview
Supero SAS-826A
Brand: Supero Pages: 16
Thermalright AXP-100H MUSCLE Manual preview
AXP-100H MUSCLE
Brand: Thermalright Pages: 36
Lattice Semiconductor sysCLOCK ECP5 Usage Manual preview
sysCLOCK ECP5
Brand: Lattice Semiconductor Pages: 43
Paradyne ACCULINK 3161 CSU Quick Reference Manual preview
ACCULINK 3161 CSU
Brand: Paradyne Pages: 19
ivideon Bridge B1610 Quick Start Manual preview
Bridge B1610
Brand: ivideon Pages: 11
LUX LUMEN 10230 Manual preview
10230
Brand: LUX LUMEN Pages: 41
GSA Bolide BN-NVR/NX User Manual preview
Bolide BN-NVR/NX
Brand: GSA Pages: 101
B+B SmartWorx Airborne M2M ABDN-er-DP55 Series User Manual preview
Airborne M2M ABDN-er-DP55 Series
Brand: B+B SmartWorx Pages: 120
DigiTech RP 3 User Manual preview
RP 3
Brand: DigiTech Pages: 28
Intel SRCU31L Quick Start Manual preview
SRCU31L
Brand: Intel Pages: 20
Williams Sound DW SY 1 User Manual preview
DW SY 1
Brand: Williams Sound Pages: 2
Quantum MC300 Prism User Manual preview
MC300 Prism
Brand: Quantum Pages: 140
Alphacool EISBLOCK AURORA ACRYL GPX-N RTX 3070 VENTUS INCL Instructions preview
EISBLOCK AURORA ACRYL GPX-N RTX 3070 VENTUS INCL
Brand: Alphacool Pages: 3
Ublox USB-ANNA-B4 User Manual preview
USB-ANNA-B4
Brand: Ublox Pages: 11
ST STEVAL-IHT003V1 User Manual preview
STEVAL-IHT003V1
Brand: ST Pages: 20
QNAP QSW-3216R-8S8T Quick Installation Manual preview
QSW-3216R-8S8T
Brand: QNAP Pages: 11
Qorvo QPE6105A Manual preview
QPE6105A
Brand: Qorvo Pages: 15

Brands by name

Popular brands

Load more brands