background image

English

E-

1

Français

Deutsc

h

595 (23-7/16”)

297 (11-11/16”)

900 (35-7/16”)

650 (25-9/16”)

153 (6”)

47(1-7/8”)

6 (1/4”)

M4 (3/16”)

300 (11-13/16”)

This speaker stand is only for the speaker systems listed
in “USABLE SPEAKERS” below. Do not use the
speakers other than these listed.

To prevent the speaker from falling, use the screws and
parts provided with the stand.

To prevent the speaker stand from falling over, select a
location which is flat and stable.

To avoid accidents resulting from tripping over loose
speaker cables and to prevent the speaker stand from
falling over, fix the speaker cables to the wall, etc.

Do not let the children lean on the stand as this might
cause the serious accidents resulting from the falling
over of the speaker stand.

PRECAUTIONS

Dimensions (W x H x D): 300 x 650 – 900 x 300mm

 (11-13/16” x 25-9/16”
 – 35-7/16” x 11-13/16”)

Weight:

2.1 kg (4 lbs. 10 oz.)

YAMAHA

NX-230P
(the main and rear speakers included in the NS-P230/
NS-P236 speaker package)

NX-220P
(the main and rear speakers included in the NS-P220
speaker package)

NX-S80S
(the front and rear speakers included in the AVX-S80
sound system)

NX-S60S
(the front and rear speakers included in the DVX-S60
sound system)

NX-S77E
(the rear speakers included in the AV-S77 sound
system)

NX-VS10E
(the rear speakers included in the VS-10 sound system)

*

Use a speaker of 1 kg or less.

*

Use a speaker with a screw hole of 4 mm in diameter
for attaching the speaker mounting bracket.

DIMENSIONS

SPS-80

SPEAKER STAND

Read this before setup

Thank you for selecting this YAMAHA SPS-80 speaker stand.

To prevent the speaker stand from discoloring and
warping, keep the speaker stand away from the stoves
and places where it will be exposed to direct sunlight,
etc.

Do not attempt to clean the speaker stand with chemical
solvents as this might damage the finish. Use a clean,
dry cloth.

Secure placement or installation is the owner’s
responsibility.
YAMAHA shall not be liable for any accident caused
by improper placement or installation of speakers.

SETUP

INSTRUCTIONS

SPECIFICATIONS

USABLE SPEAKERS

Top view

Side view

(When shortened to minimum) (When extended to maximum)

 (mm/inch)

SPS-80 ENG(02.6.17)b

02.6.19, 11:57 AM

1

Summary of Contents for SPS-80

Page 1: ...kers included in the NS P220 speaker package NX S80S the front and rear speakers included in the AVX S80 sound system NX S60S the front and rear speakers included in the DVX S60 sound system NX S77E the rear speakers included in the AV S77 sound system NX VS10E the rear speakers included in the VS 10 sound system Use a speaker of 1 kg or less Use a speaker with a screw hole of 4 mm in diameter for...

Page 2: ...Length 4 x 6 mm 6 Wrench hexagonal 1 7 Cable protection seal 2 8 Rubber cap 2 SETUP PROCEDURES Before beginning the setup check the parts list and make sure all the parts are included 3 Remove the speaker mounting bracket from the pole by removing the screw using the screwdriver 4 Attach the speaker mounting bracket to the speaker by screwing it into the screw hole on the bottom of the speaker 5 P...

Page 3: ...ghten the bracket to the speaker by moving the wrench counterclockwise 9 Connect the speaker cable to the speaker s terminals correctly Refer to the instruction manual of the speakers for connecting the speaker cables 10 Align the speaker cable to the grooved part of the bottom of the base and fix the cable on the base by putting the protection seal on it The setup has completed In the same way se...

Page 4: ...N BEI HAMBURG F R OF GERMANY YAMAHA ELECTRONIQUE FRANCE S A RUE AMBROISE CROIZAT BP70 CROISSY BEAUBOURG 77312 MARNE LA VALLEE CEDEX02 FRANCE YAMAHA ELECTRONICS UK LTD YAMAHA HOUSE 200 RICKMANSWORTH ROAD WATFORD HERTS WD1 7JS ENGLAND YAMAHA SCANDINAVIA A B J A WETTERGRENS GATA 1 BOX 30053 400 43 VASTRA FRÖLUNDA SWEDEN YAMAHA MUSIC AUSTRALIA PTY LTD 17 33 MARKET ST SOUTH MELBOURNE 3205 VIC AUSTRALIA...

Reviews: