Yamaha Soavo-900SW, Owner'S Manual

Page: 16 / 164

13 En
USING THIS UNIT
You can store up to 3 sets of your favorite settings (volume,
high-cut, phase and B.A.S.S. setting) in this unit.
■
Storing the setting
In the following procedure, PRESET 1 is used as an
example.
1
Adjust the sound balance between the
volume, high cut, phase and
B.A.S.S.
(see
page 12).
2
Press MEMORY .
The PRESET indicators on the front panel flash.
3
Press PRESET 1 .
The PRESET 1 indicator lights up. The current setting
is stored as PRESET 1.
y
• In step 3, pressing a stored number overwrites the old
setting.
• While the VOLUME control or the H-CUT control is
rotating by pressing a
PRESET
, pressing another
PRESET is ineffective.
■
Recalling a setting
Press PRESET you want to recall ( 1 , 2 or 3 ).
■
Memory back-up
Even if you turn off this unit by using the POWER switch
on the rear panel, this unit recalls the last setting when the
power is turned back on (Last memory function).
If the power is cut for more than one week, the setting is
cleared.
If you set the sleep timer, this unit automatically turns to
the standby mode after 120 minutes.
Press SLEEP.
The color of the STANDBY/ON indicator changes to
orange.
Pressing SLEEP again cancels the sleep timer.
Storing the sound balance settings
POWER STANDBY SLEEP
PHASE
MEMORY
PRESET
HIGH CUT
VOLUME
2 1 3
B.A.S.S.
H-CUT
SUBWOOFER SYSTEM NS-SW901
STANDBY
/ON
STANDBY
/ON
PHASE
1 2 3 1 2 3
B.A.S.S. PRESET
100Hz
40Hz
VOLUME
10
0
1
1
1
2
1
1
3
Remote control
Front panel
STANDBY/ON indicator
-SW901
3 1 2 3
PRESET
Note
Setting the sleep timer
POWER STANDBY SLEEP
PHASE
MEMORY
PRESET
HIGH CUT
VOLUME
2 1 3
B.A.S.S.
SLEEP
SUBW
STANDBY
/ON