3
En
English
SPEAKERS
A
B
L
R
+
+
–
–
CONNECTION TO YOUR AMPLIFIER
Amplifier
Soavo-900M
Before making connection, make sure that the amplifier is switched off.
• Connect the screw-type terminals at the rear of the
speakers to the speaker terminals of the amplifier with
the speaker cable (sold separately).
• Connect the (+) terminals on the amplifier and the
speakers using one side of the cable. Connect the (–)
terminals on both components using the other side of the
cable.
• Connect one speaker to the left (L) terminals of your
amplifier, and another speaker to the right (R) terminals,
making sure not to reverse the polarity (+, –). If one
speaker is connected with reversed polarity, the sound
will be unnatural and lack bass.
How to connect:
1
Loosen the knob.
2
Remove the insulation coating at the extremity of each
speaker cable by twisting the coating off.
3
Insert the bare wire into the hole.
4
Tighten the knob and secure the cable.
Test the firmness of the connection by pulling lightly on
the cable at the terminal.
Notes
•
Do not let the bare speaker wires touch each other as
this could damage the speaker or the amplifier, or
both of them.
•
Do not insert the insulation coating into the hole.
The sound may not be produced.
Loosen
Black (–)
3
4
Banana plug
Red (+)
Soavo-900M
Speaker
terminals of
the amplifier
(
3/8"
)
(R)
(L)
Tighten
Insulation coating
Bare wire
When using a banana plug
1
Unscrew the terminal knob.
2
Remove the cover by pulling it toward you.
3
Tighten the terminal knob.
4
Simply insert the banana plug into the terminal.
2
1
No Good
Good
01_EN_Soavo-900M_URGT.p65
7/28/06, 4:05 PM
3
