7
i
o
!0
!1
Top side
i
MUTE IN jack
Connect the cable from the Yamaha Pickup Mute™.
* Always turn the power of this product off before connecting.
* The MUTE IN jack also supplies the Pickup Mute™ with
power. Do not connect any device other than the Yamaha
Pickup Mute to this jack.
o
[
] Headset jack (4-pole stereo mini)
Connect the included stereo earphones with microphone
(CTIA standard), or a commercially available set of stereo
earphones or headphones. It also serves as an external
output terminal, and you can record your performance to
an external recording device by connecting with a com-
mercially available audio cable.
* Audio output is optimized for use with stereo earphones.
Connecting any other device may result in inferior audio
quality.
* The stereo earphone sound via the MUTE IN jack will make
the left- and right-ear balance almost the same as that
when you play the brass instrument without this product.
* Do not connect the headset jack to a microphone jack (or
mic/line jack) on a computer audio interface, mixer, etc.,
that supplies power to the connected device (plug-in-power,
phantom power, etc.). Doing so may result in malfunction.
* The microphone sound of the stereo earphone with micro-
phone is output only to USB Audio.
* When using a commercially available set of stereo ear-
phones or headphones, use one with a length of less than
3 m.
!0
Microphone volume control (VOLUME/MIC)
Adjust the microphone volume of the attached earphones
with microphone connected to the headset jack
o
.
NOTE
If you are recording only the playing sound, minimize the
microphone volume control to reduce noise.
!1
Volume control (VOLUME/MAIN)
Adjust the volume level of the PHONES jack and the USB
terminal.
