6
●
Battery Case/Output Jack Section
• The SILENT Bass
TM
does not produce sound when head-
phones are plugged into the instrument’s Output Jack.
• When making connections to the Output Jack, make sure
that a standard monaural phone plug is used. The power is
switched ON when a plug is inserted into the Output Jack,
so using a cable with a stereo, balanced, or other type of
plug that is divided into three sections can result in poor
performance or damage to the instrument or other devices
connected to it.
VOLUME
control
Adjusts the
Volume
TREBLE
control
Adjusts High
Frequencies
Cut
Boost
6F22 (S-006P)
9V battery
LINE OUT jack
●
Controls
Mixer, Recorder, Bass Amplifier, Powered Speaker,
Electric Tuner, etc.
1
The power is switched ON when a standard phone plug is
inserted into the Output Jack.
• To conserve battery power, the instrument is not equipped
with a power indicator, such as a lamp, etc., to indicate that
the power is ON.
• Before making any connections, make sure the volume is
turned down on the amplifier, powered speaker, etc. or its
power is switched OFF.
2
Rotate the VOLUME knob to adjust the volume to a suitable
level.
• If the sound is distorted when playing strongly, try turning
the volume knob slightly to the left.
3
Use the TREBLE knob to adjust (boost/cut) the tonal qual-
ity of the instrument’s upper frequencies, and the BASS knob
to adjust (boost/cut) the tonal quality of its lower frequen-
cies.
• The sound may become distorted when boosting frequen-
cies with the TREBLE or BASS knob. If so, slightly rotate
the knob to the left to reduce the frequency boost level of
the knob that is causing the distortion.
Cut
Boost
BASS
control
Adjusts Low
Frequencies
