Yamaha RY20 Owner'S Manual Download Page 31

Page: 31 / 140

Playing the Pads

Select another drum kit by rotating the Jog Dial or by using the

[ +1 ]

and

[ –1 ]

buttons.

There are 20 preset drum kits, numbered “

” to “

”, and 20 user drum

kits, numbered “

” to “

”, in the RY20. Refer to the Drum Kit list

provided on page 124.

Place the unit in Pad Bank Mode by pressing the

[PAD BANK]

button.

Select another pad bank by rotating the Jog Dial or by using the

[ +1 ]

and

[ –1 ]

buttons. Notice the change in the Pad Bank indicator.

NOTE

Pressing the

[DRUM KIT]

button again will switch the RY20 back to the previously

selected main mode, such as Pattern or Song Play mode.

■

Selecting a Pad Bank

NOTE

Pressing the

[PAD BANK]

button again will switch the RY20 back to the previously

selected main mode, such as Pattern or Song Play mode.

PAD BANK

PATTERN

A CHASE

MAIN A

PAD BANK

OTHERS

HH
SD
BD

PATTERN

C CHASE

MAIN A

PAD BANK

OTHERS

HH
SD
BD

Summary of Contents for RY20













































































































































Search results

Summary of Contents for RY20

Reviews:

Related manuals for RY20

Brands by name

Popular brands

Yamaha RY20, Owner'S Manual

Search results

Summary of Contents for RY20

Reviews:

Related manuals for RY20

Brands by name

Popular brands