95
En
Graphical user interface (GUI) screen
AD
V
ANCED
OPERA
T
ION
English
Procedure of the network configuration
1
From the top GUI screen, press
4
k
/
n
on
the remote control repeatedly and then
4
h
to select “Network”.
2
Press
4
k
/
n
repeatedly and then
4
h
to
select “DHCP”.
3
Press
4
k
/
n
to select “On” or “Off” and
then
4
ENTER
to confirm.
• If you select “On”, you do not have to set other network
parameters. Refer to step 5 and finish the configuration.
• If you select “Off”, you need to set other network
parameters. Refer to steps 4 through 6 to set the
parameters.
When “DHCP” is set to “On”, you cannot select and adjust
any other network settings. To specify the other parameters,
you need to first set “DHCP” to “Off”.
4
Press
4
k
/
n
to select the desired parameter
and then
4
h
.
5
Press
4
l
/
h
repeatedly to select the digit
to change and then press
4
k
/
n
repeatedly
to change the number.
6
Press
4
ENTER
to confirm the setting of the
parameter.
7
Repeat steps 4 through 6 to configure each
network parameter.
8
Press
4
n
repeatedly to select “Setup” and
then
4
ENTER
to finish configuration.
In case you have changed your network configuration, you may
need to reconfigure the network settings again.
y
You can reset the network settings of this unit to the initial factory
settings by using “NETWORK” of “INITIALIZE” in the
advanced setup menu (see page 126).
■
Play Style (Playback styles)
Use this feature to adjust the playback style according to
your preference. You can shuffle songs in a random order
or repeat one specific song or a sequence of songs.
Repeat (Repeat)
Use this feature to set this unit to repeat one song or a
sequence of songs.
If “Repeat” is set to “Single”, the setting will be reset to “Off”
when this unit is turned off.
Shuffle (Shuffle)
Use this feature to set this unit to play songs or albums in a
random order.
■
Information (Network information)
Use this feature to display the network system
information.
The above display is an example.
MAC Address
(MAC (Media Access Control) address)
This information displays the MAC address that is
assigned to this unit.
Status (Network status)
This information displays the current link status of the
network.
Display status: 10BASE-T, 100BASE-TX, Full Duplex,
Half Duplex, No Link
“No Link” appears when network connection is not made.
System (System ID)
This information displays the system ID that is assigned to
this unit.
Note
Note
Choice
Functions
Off
Deactivates the repeat function.
Single
Repeats one song. “
” appears in the top
right corner of the playback status screen.
All
Repeats a sequence of songs. “
” appears in
the top right corner of the playback status
screen.
Note
Choice
Functions
Off
Deactivates the shuffle function.
On
Play songs or albums in a random order. “
”
appears in the top right corner of the playback
status screen.
Note
Note
Network
Play Style
Information
MAC Address
00:00:00:00:00:00
Status
100 BASE-TX
Full Duplex
System
ABCDE123
