32
TUNING
3
Press and hold MEMORY (MAN’L/AUTO FM)
for more than 3 seconds.
The preset number, the “MEMORY” and “AUTO”
indicators flash. Then, after about 5 seconds,
automatic preset tuning begins from the frequency
currently displayed toward the higher frequencies.
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
TUNING
MODE
AUTO/MAN'L MONO
MEMORY
MAN'L/AUTO FM
AUTO
FM/AM
Presetting Stations
■
Automatically presetting stations
(for RDS stations)
You can use the automatic preset tuning feature to store
RDS stations. This function enables the unit to
automatically tune in to RDS stations with strong signals,
and to store up to 40 (8 stations x 5 groups) of those
stations in order. (See pages 35 to 37 for details on RDS
stations.) This feature enables you to easily tune in to any
preset station by selecting the preset station number (see
page 33).
1
Press FM/AM to select the FM band.
2
Press TUNING MODE (AUTO/MAN’L MONO)
so that the “AUTO” indicator lights up on the
front panel display.
Notes
• Any stored station data existing under a preset number is
cleared when you store a new station under that preset
number.
• You can manually replace a preset station with another FM or
AM station by simply following the procedure in the section
“Manually presetting stations” on page 33.
• If the number of the received stations does not reach E8,
automatic preset tuning has automatically stopped after
searching all stations.
• Only RDS stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune in to it manually
in the monaural mode, and store it by following the procedure
in “Manually presetting stations” on page 33. (There may be
a case that this unit cannot receive a station which could be
received by using the automatic tuning method. This is
because this unit receives a large amount of PI (Program
Identification) data along with the station.)
Automatic preset tuning options
You can select the preset number from which the unit
will store RDS stations and/or begin tuning toward
lower frequencies. Before automatic preset tuning
begins (after pressing MEMORY in step 3):
1. Press A/B/C/D/E and PRESET/TUNING
l
/
h
to
select the preset number under which the first station
will be stored. Automatic preset tuning will stop
when stations have all been stored up to E8.
2. Press PRESET/TUNING (EDIT) to turn off the
colon (:) and then press PRESET/TUNING
l
to
begin tuning toward lower frequencies.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is set in the standby
mode, the power cord is disconnected from the AC
outlet, or the power supply is temporarily cut due to
power failure. However, if the power is cut for more
than one week, the preset stations may be cleared. If
so, store the stations again by using the presetting
station methods.
Lights up
DIGITAL
DTS MOVIE THEATER 1
DTS MOVIE THEATER 1 2
DOLBY DIGITAL
DOLBY DIGITAL
PRO LOGIC ENTERTAINMENT
PRO LOGIC ENTERTAINMENT
DSP
6.1/ES
PCM
PRO LOGIC
PRO LOGIC
A
SP
B
VIRTUAL
VIRTUAL
PS
PS PTY
PTY RT
RT CT
CT
PTY
PTY HOLD
HOLD EON
EON STEREO
AUTO
NEWS INFO AFFAIRS SPORT
NEWS INFO AFFAIRS SPORT
MEMORY
TUNED
ZO
ZONE 2
dB
ms
SLE
SLEEP
A/B/C/D/E
SPEAKERS
STANDBY
/ON
A
B
BASS
EXTENSION
PROCESSOR
DIRECT
PRESET/
TUNING
BASS
6CH INPUT
VOLUME
INPUT
INPUT MODE
–
+
TREBLE
–
+
PRESET
/TUNING
EDIT
MEMORY
MAN'L/AUTO FM
TUNING
MODE
AUTO/MAN'L MONO
RDS MODE
/FREQ
EON
PTY SEEK
MODE
START
FM/AM
PHONES
S VIDEO
VIDEO
L AUDIO R
OPTICAL
SILENT
VIDEO AUX
EFFECT
PROGRAM
ON
OFF
SURROUND
D I G I T A L
D I G I T A L
TUNER
DSP
1
2
3