Yamaha RX-V6671 Owner'S Manual Download Page 115

Page: 115 / 128

115

Error indications for SIRIUS Satellite Radio™

Message

(alphabetical order)

Cause

Remedy

ACQUIRING SIG

The signal is too weak.

Adjust the orientation of the antenna of the SiriusConnect tuner by checking the antenna reception level
displayed in the front display (p.51) or TV (p.51).

ANTENNA ERROR

The antenna is not connected to the SiriusConnect tuner properly.

Check the connection of the antenna and SiriusConnect tuner (p.48).

CALL SIRIUS

The selected channel is not currently subscribed.

To subscribe the selected channel, contact SIRIUS Satellite Radio.
URL: https://activate.siriusradio.com/
Phone: 1-888-539-SIRIUS (1-888-539-7474)

CHECK SR TUNER

The SiriusConnect tuner is not connected to this unit or AC wall
outlet properly.

Check the connection of the SiriusConnect tuner and this unit or AC wall outlet (p.48).
SiriusConnect tuner to the AC wall outlet.

INVALID CH

The selected channel is currently out of service.

Try another channel.

NOT SUPPORTED

This unit does not support the connected SIRIUS Satellite Radio
tuner.

Use the SiriusConnect tuner supported by this unit.

Summary of Contents for RX-V6671

































































































































Search results

Summary of Contents for RX-V6671

Reviews:

Related manuals for RX-V6671

Brands by name

Popular brands

Yamaha RX-V6671, Owner'S Manual

Search results

Summary of Contents for RX-V6671

Reviews:

Related manuals for RX-V6671

Brands by name

Popular brands