Yamaha RX-V6671 Owner'S Manual Download Page 114 | Manualshive

Page: 114 / 128

background image

En

114

Error indications on the front display

Message

(alphabetical order)

Cause

Remedy

Access denied

Access to the PC is denied.

Configure the sharing setting and select this unit as a device to which music contents are shared (p.64).

Access error

This unit cannot access the USB device.

Turn off this unit and reconnect your USB device. If the problem persists, try another USB device.

This unit cannot access the iPod connected to the USB jack.

Turn off the iPod and turn on it again.

There is a problem with the signal path from the network to this unit.

Make sure your router and modem are turned on.

Check the connection between this unit and your router (or hub) (p.30).

No device

This unit cannot detect the USB device.

Turn off this unit and reconnect your USB device. If the problem persists, try another USB device.

This unit cannot detect the iPod connected to the USB jack.

Turn off the iPod and turn on it again.

Not found

The Bluetooth component is not found.

(When pairing)
Turn on the Bluetooth component and set it in pairing mode.

(When establishing a wireless connection)
- Turn on the Bluetooth component.
- Place the Bluetooth component within 10 m (32 ft) of the Bluetooth receiver.
- Perform pairing again.

Unknown iPod

The connected iPod is not supported by the unit.

Use an iPod supported by this unit (p.54).

Unable to play

The unit cannot play back the songs stored on the iPod for some
reasons.

Check the song data. If it cannot be played on the iPod itself, the song data or storage area may be
defective.

The unit cannot play back the songs stored on the PC for some
reasons.

Check if the format of files you are trying to play is supported by this unit. For information about the
formats supported by this unit, see “Playing back music stored on PCs” (p.64). If this unit cannot play
back any files, the network may be overloaded with heavy traffic, and playback is interrupted.

USB Overloaded

Over current passes through the USB device.

Turn off this unit and reconnect your USB device. If the problem persists, try another USB device.

«
...
112
113
114
115
116
...
»

Summary of Contents for RX-V6671

































































































































Reviews:

No comments

Related manuals for RX-V6671

E-iSERV CD7200 mkII

Brand: Eclipse Pages: 119

Brand: Eclipse Pages: 230

CD5000 - ECLIPSE - Radio

Brand: Eclipse Pages: 40

Brand: Eclipse Pages: 20

Brand: Eclipse Pages: 98

Brand: Harman Kardon Pages: 10

Brand: Harman Kardon Pages: 2

Brand: Icom Pages: 48

AMG3787E-1-DR-1550-HP

Brand: AMG Pages: 12

Brand: Icom Pages: 2

Brand: KYL Pages: 15

Brand: Albrecht Pages: 20

Brand: Nakamichi Pages: 8

Brand: tbs electronics Pages: 20

Brand: Navilock Pages: 12

Brand: Yaesu Pages: 3

Brand: AudioSonic Pages: 76

Brand: Akai Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands