34
Changing the RDS modes
When an RDS station is received, “PS”, “PTY”, “RT” and/or “CT” that correspond to the RDS data services employed by the station
light up on the display. By pressing the RDS MODE/FREQ (RDS MODE) button once or more, you can change the display mode
among the RDS modes employed by the received station in the order shown below. (The RDS mode not employed by the station
cannot be selected.) Illumination of the indicator on the head of a name of RDS mode shows that the corresponding RDS mode is
now selected.
* When an RDS station is received, do not press the RDS MODE/FREQ (RDS MODE) button until one or some names of RDS
modes light up on the display. If the button is pressed before one or some names light up on the display, the mode cannot be
changed. This is because the unit has not received all of the RDS data on the station yet.
* If no name of RDS mode lights up on the display, the mode cannot be changed.
PS mode
The name of the station being received is displayed.
If the station does not employ the PS data service, this mode
will not be selected.
PTY mode
The type of the program on the station being received is
displayed. If the station does not employ the PTY data
service, this mode will not be selected.
(You can make this unit search for a station which is
broadcasting a program of your desired program type. For
details, refer to the next page.)
RT mode
Information about the program on the station being received
is displayed. Information is displayed by a maximum of 64
Roman Alphabets including umlaut sign. If other characters
are used on the RT data, they are displayed with under-bars.
If the station does not employ the RT data service, this mode
will not be selected.
CT mode
Current time is displayed in the following form. The CT data
from the station being received changes every minute.
If the data is accidentally cut off, “CT WAIT” may light up. If
the station does not employ the CT data service, this mode
will not be selected.
Frequency
The frequency of the station being received is displayed.
display mode
RDS MODE
RDS MODE/FREQ
Notes
•
RDS data service cannot be utilized by this unit if the received signal is not strong enough. Especially, the RT (Radio Text mode)
needs much data to be received, so it may occur that RT mode cannot be displayed even if other RDS modes (PS, PTY, etc.) are
displayed.
•
There may be a case that RDS data reception is not possible due to poor reception conditions. If so, press the TUNING MODE
button so that “AUTO (AUTO TUNING)” goes off from the display. Though the reception mode is changed to monaural by this
operation, when you change the display to an RDS mode, RDS data may be displayed.
•
If the signal strength gets weakened by external interference during receiving an RDS station, the RDS data service may be cut off
suddenly and “...WAIT” will light up on the display.
* The mode in the shaded area is for RX-V592RDS only.
Hour
Minute
RX-V592RDS
RX-V692RDS
