Firmware Update Procedure for RX-V467/RX-V567
Page.5 of 5
IN CASE OF ERROR
Case1 Display on the receiver “CDDA Upgrader” doesn’t change after playing the
BD/DVD/CD player.
Check digital cable wiring. Only optical or coaxial connection can be used for
this update. HDMI connection will not work.
Check digital out setting. When using DVD/BD players, make sure the digital
out is set to “PCM”. Once update is completed, reset DVD/BD player to its
original settings.
Check update disc. Make sure that your CD-R/RW is finalized and created
as an “AUDIO CD”. (playable on any BD/DVD/CD player)
If all above are cleared, your BD/DVD/CD player may not be suited for this
update. Try another BD/DVD/CD player or contact your local authorized
service center to update the receiver for you.
Case2 Other unintended error occurred.
"ERROR"
was
displayed during the update
Receiver doesn't power up after the update.
Solution: Try the following recovery method
Step PL1.
Unplug the AC power cable of the AV receiver from wall outlet.
Step PL2.
On the front panel of the AV receiver, press and hold the
[INFO]
button
and keep it pressed, while you plug the AC power cable of the Yamaha
receiver to the wall outlet. Once the front panel displays
"CDDA
Upgrader"
release the
[INFO]
button.
Step PL3.
Go to Step 4
“START FIRMWARE UPDATE”
.
