Firmware Update Procedure for RX-V465/565/665/765
________________________________________________________________________________
IN CASE OF ERROR
In case you have problems such as the example below, perform the update by the following recovery
method.
"ERROR" was displayed during the update
Receiver doesn't power up after the update.
Step PL1. Unplug the AC power cable of the Yamaha receiver from wall outlet.
Step PL2. On the front panel of the Yamaha receiver, press and hold the [STRAIGHT] button
and keep it pressed, which you plug the AC power cord of the Yamaha receiver to
wall outlet. Once the front panel displays "CDDA UPGRADER" release the [STRAIGHT] button.
Step PL3. Go to Step 5 of REPROGRAM FIRMARE.
Page 5 of 5
