RX-V550/HTR-5750
RX-V450/HTR-5740/DSP-AX450
32
RX-V550/HTR-5750
RX-V450/HTR-5740/DSP-AX450
Reference data
INPUT: DVD ANALOG (Both ch)
Sub-menu
Input level
Volume
SPEAKER OUTPUT (1kHz)
SUBWOOFER
FRONT L/R
CENTER SURROUND L/R SURROUND BACK OUTPUT (50Hz)
1 FRNT: SML 0dB
1kHz Both ch, -20 dBm +6.0 dB
+13.0 dBm +13.0 dBm +13.0 dBm +13.0 dBm
+3.5 dBm
2 CENTER: NONE
1kHz Both ch, -20 dBm +6.0 dB
+10.0 dBm
-
∞
+13.0 dBm +13.0 dBm
-0.5 dBm
3 LFE/B: FRNT
50Hz Both ch, -20 dBm +6.0 dB
+25.0 dBm
+3.5 dBm
+3.5 dBm
+3.5 dBm
∞
4 Pres Mix: 5ch
1kHz Both ch, -20 dBm +6.0 dB
-
∞
+13.0 dBm +13.0 dBm +13.0 dBm
-0.5 dBm
5 Front Gain 1
1kHz Both ch, -20 dBm +6.0 dB
+20.0 dBm +13.0 dBm +13.0 dBm +13.0 dBm
-0.5 dBm
6 Front Gain 2
1kHz Both ch, -20 dBm +6.0 dB
+20.0 dBm +13.0 dBm +13.0 dBm +13.0 dBm
-0.5 dBm
7 SURR B check
1kHz Both ch, -20 dBm +6.0 dB
-
∞
-
∞
-
∞
+13.0 dBm
∞
FRONT: SMALL 0dB
CENTER: NONE
LFE/BASS: FRONT
Pres Mix: 5ch
Front Gain 1
Front Gain 2
SURROUND B Check
Sub-menu
FRONT SP CENTER SP
SL/SR
SB
LFE/BASS
1
FRNT: SML 0dB
SMALL
LARGE
LARGE
LARGE
SWFR
2
CENTER: NONE
LARGE
NONE
LARGE
LARGE
BOTH
3
LFE/B: FRNT
LARGE
SMALL
SMALL
SMALL
FRONT
4
Pres Mix: 5ch
LARGE
LARGE
LARGE
LARGE
SWFR
5
FRNT GAIN 1
LARGE
LARGE
LARGE
LARGE
SWFR
6
FRNT GAIN 2
LARGE
LARGE
LARGE
LARGE
SWFR
7
SURR B Check
LARGE
LARGE
NONE
LARGE
SWFR
5. SPEAKERS SET
The input signal is automatically identified and switched in
the priority order of dts
→
DOLBY DIGITAL
→
AAC
→
PCM AUDIO
→
Analog (A/D) according to the signal
detection.
The signals output from the DSP block are the same as 2.
BYPASS: DSP BYPASS.
LARGE:
This mode is used with a speaker with high
bass reproduction performance (a large
unit). Full bandwidth signals are output.
SMALL:
This mode is used with a speaker with low
bass reproduction performance (a small
unit). The signals of 90Hz or less are mixed
into the channel specified by LFE/BASS.
NONE:
This mode is used with no speaker. The
center content is reduced by 3dB and
distributed to MAIN L/R.
The analog switch settings for each sub-menu are as
shown in the table below.
5. SPEAKERS SET
入力は信号検出によって、dts → DOLBY DIGITAL → AAC →
PCM AUDIO → アナログ(A/D)の優先順で自動判別切り換えさ
れます。
DSP部からは、No.2 BYPASSのDSP BYPASSと同様の信号
が出力されます。
LARGE: 低音再生能力の高い(ユニットの大きい)スピー
カーを使用するモードです。全帯域が出力されま
す。
SMALL: 低音再生能力の低い(ユニットの小さい)スピー
カーを使用するモードです。90Hz以下がLFE/
B A S S で指定したチャンネルにミックスされま
す。
NONE:
スピーカーを使用しないモードです。センター成
分は-3dBされて、MAIN L/R に振り分けられま
す。
各サブメニューにおけるアナログスイッチの設定は以下の通り
です。